DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Access to Jetted Tub Electrical - Code Considerations




Closed Thread
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-29-2013, 05:15 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,215
Liked 837 Times on 748 Posts
Likes Given: 1453

Default

Just for chuckles I have a couple questions.
If the plug at the floor was flooded and the water was live, wouldn't that be a short that would kick the breaker?
We worry about standing in the shower and hitting a switch. If you have pvc or abs drains and pex supply, is the water grounded?



__________________
nealtw is online now  
 
Quick reply to this message
Old 01-29-2013, 06:41 PM  
speedy petey
Lic.Electrical Contractor
 
Join Date: Mar 2006
Posts: 445
Liked 39 Times on 27 Posts
Likes Given: 17

Default

Quote:
Originally Posted by nealtw View Post
Just for chuckles I have a couple questions.
If the plug at the floor was flooded and the water was live, wouldn't that be a short that would kick the breaker?
We worry about standing in the shower and hitting a switch. If you have pvc or abs drains and pex supply, is the water grounded?
NO, the water is not nearly conductive enough to carry that kind of current.

I have seen literally submerged breaker panels, live and working just fine.


__________________
speedy petey is offline  
nealtw Likes This 
Quick reply to this message
Old 01-29-2013, 08:12 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,215
Liked 837 Times on 748 Posts
Likes Given: 1453

Default

I have seen literally submerged breaker panels, live and working just fine.

It will take the easy route from hot leg to neutral or ground, and bybass the breakers, still working but loosing power?

__________________
nealtw is online now  
 
Quick reply to this message
Old 01-30-2013, 01:12 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,072
Liked 122 Times on 102 Posts
Likes Given: 300

Default well

And the end...the original poster has gotten fed up, Wuzzat, please keep to posting answers to the questions relevant to the original question, And Petey we know you could care less what folks think about you, but thanks for at least answering the original question.

And to add my 2 cents, there is no issue with an access panel being unvented under the tub. The only reason you may have needed a vent was for a steam system in the showers. Removable panels are allowed for electrical outlets with a dedicated cuircut.

__________________

Just My
Made in the

inspectorD is offline  
 
Quick reply to this message
Closed Thread


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Electrical Questions here or in Electrical Forum toofast Pools and Spas 11 10-19-2012 08:31 AM
gable-end access to attic jingle Carpentry and Woodworking 2 10-23-2007 11:22 PM
Deck with wheelchair access Outbacker General Home Improvement Discussion 1 08-29-2006 09:10 PM