DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Electrical and Wiring (http://www.houserepairtalk.com/f9/)
-   -   Add full time hot outlet to 3 way switch circuit? (http://www.houserepairtalk.com/f9/add-full-time-hot-outlet-3-way-switch-circuit-12919/)

lexar 01-09-2012 11:49 AM

Add full time hot outlet to 3 way switch circuit?
 
I want to add another outlet at the switched side of a 3-way circuit. (the side without direct power coming in)
Currently I have pwr-3way(#1)-3way(#2)-Lights

How would I be able to add a constant power outlet from the 3way(#2) side?

JoeD 01-09-2012 12:11 PM

Find another power source other than the #2 three way and add a cable. You can not tap unswitched from the #2 three way switch unless you run a 4 wire cable between the switches.

lexar 01-09-2012 12:38 PM

I read this from a similar question on anther forum but not sure what it means .. Would this work?

Add full time hot outlet to 3 way switch circuit? - Yahoo! Answers

"I would replace the double-throw in the first box with a regular single throw for the light, fan, what have you. Using the red wire on that switch for your device, wire nut the remaining black to the supply black in the first box for the outlet you are installing in the second box. Now at the second box wire nut that red to supply your light to the black that feeds it from the old Common terminal of the old three-way switch and use the remaining black that was supplying one of the L terminals, now will be hot full time from the first box, to supply the terminals of the outlet going in the second box."

JoeD 01-09-2012 06:04 PM

You would lose the function of switching at both locations if you do that. It will onlybe switched from the one location.
It will work however if the second is required by code to be there then you have a code violation.


All times are GMT -6. The time now is 12:13 PM.