DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Burn marks on wiring




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-21-2011, 02:34 PM  
airicwilson
Junior Member
 
Join Date: Feb 2011
Location: brantford, ontario
Posts: 3
Default Burn marks on wiring

We are in the process of renovating our kitchen. Our first step was to remove one of the walls. After I ripped down all the drywall and exposed the wiring I noticed a small burn mark on the wire sheath where the wiring comes through the stud at the ceiling from the attic. The wire is for the light switch that powers the main light in the kitchen. Is this burn mark an indicatation there is a problem with the wiring or that it is unsafe. Any expertise on this situation would be greatly appreciated, thank you.



__________________

Last edited by airicwilson; 02-21-2011 at 02:57 PM.
airicwilson is offline  
 
Reply With Quote Quick reply to this message
Old 02-21-2011, 03:44 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,194
Liked 107 Times on 94 Posts
Likes Given: 64

Default

Probably the result of where someone pounded a nail or drilled a screw into the stud and hit the wire. I can't see too good but, if the insulation is OK then the wire should still be good.



__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 02-21-2011, 04:03 PM  
airicwilson
Junior Member
 
Join Date: Feb 2011
Location: brantford, ontario
Posts: 3
Default

The sheath looks fine (other than the burn mark), and I'm replacing the wire anyways because I'm moving the switch to a different wall and it needs to be longer. I just didn't know if there was a bigger problem somewhere else.
Thanks for the reply.

__________________
airicwilson is offline  
 
Reply With Quote Quick reply to this message
Old 02-21-2011, 04:36 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,226
Liked 838 Times on 749 Posts
Likes Given: 1456

Default

Are you sure the wire is burned or is that dirt from air flow. Newer houses would have that hole plugged around the wire for air flow and fire stop. There are products sold for this and homeowners should crawl around the attic and basements and plug all these holes.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 02-21-2011, 06:00 PM  
airicwilson
Junior Member
 
Join Date: Feb 2011
Location: brantford, ontario
Posts: 3
Default

I think you may be right with it being dirty, i had a plumber friend who does a little electrical work come over and look at it and he rubbed it right off and the wire looks fine. He said with breakers it's nearly impossible for a wire to over heat and burn, you will always trip the breaker first. Thanks for the help, the wife can sleep easy now!



__________________
airicwilson is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Floor Scuff marks removing idea? Superpack Cleaning 7 06-04-2012 03:16 AM
How to get rid of burn smell in basement ilyaz Cleaning 5 08-19-2010 01:31 PM
Removing tape marks? TaskBoy Decorating and Design 1 06-21-2008 09:20 AM
Damage from burn ... a way to erase?? ku_alum General Home Improvement Discussion 2 04-09-2008 10:47 PM
Black truss marks on vaulted ceiling? jondoe Flooring 4 02-21-2008 08:36 PM