DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Did I mount outdoor light fixture correctly?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-15-2009, 07:42 PM  
Devg
Junior Member
 
Join Date: Aug 2009
Posts: 1
Default Did I mount outdoor light fixture correctly?

I just moved in my first house, and the outdoor light near the front door was broken.

I went ahead and replaced it with a new fixture, which I've done in the past but this time I got a bit stuck.

First, I removed the old fixture and "mounting bar" from the junction box. Next I installed a new "round" mounting bracket to the box.

I was confused with the ground wire. The OLD fixture had black and white wires. The bare ground wire coming from the wall was screwed to the metal junction box ground screw (not any brackets).

The NEW fixture has black, white, and bare ground. So I followed the directions and I did black to black, white to white, and I removed the ground that was screwed into the junction box and screwed it into the new bracket's ground screw. With the slack coming after the screw, I wire capped it to the ground wire of the fixture. So now it goes wall wire bare ground --> screwed to bracket ground --> capped to fixtures bare ground wire. Is this correct or should I have left it on the metal junction box.


Lastly one more thing, there are two long screws coming out of the bracket. These are the screws that the light mounts to the wall with. They are too long, the caps do not go all the way down. Did I do something wrong or does this happen sometimes? Can I just use my dremel tool to cut them shorter? Is that bad?


Thanks!



__________________
Devg is offline  
 
Reply With Quote Quick reply to this message
Old 08-16-2009, 06:20 AM  
locknut
Member
 
Join Date: Apr 2009
Posts: 75
Default

Don't make it more complicated than it really is. Have the wallbox grounded via the feed cable ground wire, have the fixture grounded via its ground wire. If the attachment studs are too long, cut them to suit or use shorter ones.

__________________
locknut is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Outdoor security lighting (dawn-to-dusk fixture) FarmerBill General Home Improvement Discussion 2 02-13-2009 12:40 AM
Installing new box for new wall mount light fixture crapbathroom Electrical and Wiring 1 03-30-2007 09:53 AM
Replacing a light fixture iqchicken Electrical and Wiring 14 07-16-2006 06:32 PM
Light fixture help supag116 Electrical and Wiring 4 05-08-2006 11:01 AM
AC install advice, to mount or float outdoor unit. mister_p HVAC 1 03-08-2006 05:54 PM