DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Dual toggle switch - did I kill it?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-09-2009, 12:21 PM  
cheesefood
Ask me bout homebrewtalk.
 
cheesefood's Avatar
 
Join Date: Aug 2007
Posts: 45
Liked 1 Times on 1 Posts

Send a message via Yahoo to cheesefood
Default Dual toggle switch - did I kill it?

OK, so I'm going to quickly prove that I'm not an electrician.

I was told that the Leviton switch for my light / disposal was obsolete and finding a plate would be difficult, so I opted to replace it.

I turned off the power, put in the toggle, then turned the power back on and flipped the switch (using insultated pliers). There was a big flash and sparks shot out, then it died. I went downstairs and saw that two circuits had tripped.

OK, so that explained why I had two black wires. I then found out that one of the blacks went to a circuit for my dishwasher and the other was a different circuit. I removed the dishwasher circuit wire from the toggle and hooked it up so that the garbage disposal and the light are on the same circuit. I capped and taped the other black wire.

Last night i noticed some funny things. The dishwasher made new sounds. The cordless phone charger station died. And the light can take a moment or two before it turns on.

Did I kill the switch or the gear?



__________________
cheesefood is offline  
 
Reply With Quote Quick reply to this message
Old 02-09-2009, 02:44 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,185
Liked 105 Times on 92 Posts
Likes Given: 61

Default

I'm not exactly sure what happened here. You didn't mention two black wires when you changed the switch so I have to assume that you simply reversed procedure with the switch replacement. From what I'm reading here, your saying that the dishwasher, light and garbage disposal are all on the same circuit/toggle but, you tripped two breakers.
Sounds like someone hacked the wiring job (not to code). My first guess is that the switch you used to replace the toggle isn't rated for 120V/20A. You may have fried the switch. Is a light switch and a toggle switch the same thing in your book?

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 02-09-2009, 04:55 PM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 951
Liked 101 Times on 83 Posts
Likes Given: 3

Default

Look at the old switch and see if there is a tab broken of that is still present on the new switch. You have two circuits in the same box. Probably one was for the dishwasher and the other was for the disposal.
Tell us all the wires in the box, How they were connected and how you connected them?

__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Changing Switch to Recptacle SavvyCat Electrical and Wiring 2 01-04-2009 05:28 PM
Ceiling fan with 4 way switch. gan_nair Electrical and Wiring 4 08-13-2008 06:12 PM
Special Light Switch Required CraigFL Electrical and Wiring 9 02-20-2008 05:29 PM
Illuminated wall switch glows but bulbs won't light Paul in Maryland Electrical and Wiring 3 10-21-2007 08:34 AM
Dinning room switch Blair1955 Electrical and Wiring 9 06-22-2007 05:25 AM