DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Electrical and Wiring (http://www.houserepairtalk.com/f9/)
-   -   junction/outlet (http://www.houserepairtalk.com/f9/junction-outlet-16420/)

floatr 08-26-2013 10:33 PM

junction/outlet
 
I am installing a outside gfci outlet on its own 20 amp,12/2 .I did have a large wire on a now not connected circuit,to go to shed,an would like to cap that off on both ends where its available later.it is 3 wire #6.if I use a large enough outlet box can both circuits,large not connected on either end,be in the box together.and if I can what size box ,and size of pipe going thru brick?
Any info is appreciated.

nealtw 09-06-2013 05:00 PM

You wouldn't be able to ever use them out of the same box, so why not 2 boxes now.

CallMeVilla 09-06-2013 11:30 PM

1 Attachment(s)
Essentially, you want to use it as a pull box for the #6 wire. It could not be connected to anything "at" the box except another #6 for the shed. If you use a deep box you could do this with another #12 with no problem.

So, as long as there is nothing but a connection inside the box I think you can do it. Have not researched code ... you might dig into that.


All times are GMT -6. The time now is 03:10 PM.