DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Light Switch Replacement Question




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-22-2011, 07:55 AM  
dtheobald
Junior Member
 
Join Date: Nov 2011
Location: Eureka, California
Posts: 16
Default

OK, THank you for all of your replies.

The red wire that is one on post with another black wire actually goes to the other switch next to it. The other switch has a black wire going to it, and this red wire which goes to the switch next to it. That switch has two wires going into it, both black.

I replaced both switches, and copied the wiring, everything works fine but I am concerned with what some had said. The new switches have green ground screws...currently they are attached to nothing. And one had said to not mount 2 screws on one post...which I did.

I took photos, but I left my memeory card at home. I can post them tomorrow. I apologize for not responding to my own thread sooner, I dont have the internet at our home, and I was home with a sick baby yesterday, so I missed work-where my internet is.



__________________

Devin

dtheobald is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2011, 08:08 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,904
Liked 814 Times on 727 Posts
Likes Given: 1405

Default

The 2 wires on one screw should have been wire nutted together with a short third wire to go to the switch.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2011, 11:02 AM  
dtheobald
Junior Member
 
Join Date: Nov 2011
Location: Eureka, California
Posts: 16
Default

Quote:
Originally Posted by nealtw View Post
The 2 wires on one screw should have been wire nutted together with a short third wire to go to the switch.
I am not quite sure I understand how to do this. 'nutted together'. In what manner?
__________________

Devin

dtheobald is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2011, 01:04 PM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 952
Liked 101 Times on 83 Posts
Likes Given: 3

Default

Example of a pigtail connection using a wire nut.

__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2011, 01:30 PM  
dtheobald
Junior Member
 
Join Date: Nov 2011
Location: Eureka, California
Posts: 16
Default

Quote:
Originally Posted by JoeD View Post
Example of a pigtail connection using a wire nut.

Perfect! Thanks alot. I did that on my model railroad, and that works fine...Thanks alot!


__________________

Devin

dtheobald is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Light switch problem TGMcCallie Electrical and Wiring 4 07-21-2011 02:20 PM
15 amp light switch on a 20 amp circuit stubecullerstan Electrical and Wiring 5 04-05-2010 02:59 PM
2-way light switch issue jastangl Electrical and Wiring 5 06-19-2009 09:20 AM
3-way switch not turning off light cheesefood Electrical and Wiring 1 02-22-2009 08:12 PM
rewire light from switch to light davidh424 Electrical and Wiring 3 01-12-2009 08:56 PM