DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Need bathroom fan/light help...I'm dumb!




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-22-2008, 10:30 AM  
shibby
Junior Member
 
Join Date: Jan 2008
Posts: 1
Default Need bathroom fan/light help...I'm dumb!

Hi, I don't have much experience with electrician stuff, so please excuse my ignorance.

I'm trying to install a bathroom fan/light. The unit has 3 wires coming out of it (2 white, 1 black). My wire coming from the wall switch has one black, one white, and a bare copper wire.

I connected the 2 white wires from the fan/light to the white wire, and the black to the black wire. I did nothing with the bare copper wire (just taped it up).

The fan works fine when you flip the switch, but the light does not work at all. The bulbs are fine.

So, where did I go wrong? I'm sure my wiring is the cause, but why does the fan work but not the light?

Any help is GREATLY appreciated, thanks!



__________________
shibby is offline  
 
Reply With Quote Quick reply to this message
Old 01-22-2008, 11:17 AM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Welcome Shibby:
Appearantly you missed a wire inside the fan housing that goes to the bulb. You only tied in to the motor wire. Open the access box and look again; I'm just sure you will find a loose wire.
There should be 2 blacks and 2 whites in the fan access box.
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 01-22-2008, 04:53 PM  
Parrothead
Member
 
Join Date: Dec 2006
Location: , WI
Posts: 65
Likes Given: 1

Default

Or possibly 2 whites, a black and a blue, in which case the blue would be for the light...........

__________________
Parrothead is offline  
 
Reply With Quote Quick reply to this message
Old 01-22-2008, 09:56 PM  
480sparky
Junior Member
 
480sparky's Avatar
 
Join Date: Nov 2007
Posts: 16
Default

You missed the light wire, usually they're blue. Tie it to the two blacks.

__________________
480sparky is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Bathroom Help!!!! Vikeologist Flooring 8 03-10-2012 01:41 AM
Replace pipes in bathroom, need advice Steelmesh Plumbing Forum 2 11-04-2008 07:56 AM
bathroom odour stevelygee General Home Improvement Discussion 5 03-29-2007 08:25 AM
durable flooring for bathroom fixitright Flooring 2 10-05-2005 09:01 PM