DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > new circuits




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-30-2006, 11:22 AM  
peltaz
Junior Member
 
Join Date: Sep 2006
Posts: 1
Default new circuits

I am planning to install 15-18 recessed lights in soffits in a couple of rooms in my house. I plan to run two new 20 amp circuits from a subpanel (capacity is fine? and divide the lights half and half. Judging from some of the other posts there are reasons to use 15 amp circuits instead. If I am going to the trouble of installing new circuits why would I not want them to be 20 amp for future expansion? Thanks.



__________________
peltaz is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2006, 08:19 PM  
Snoonyb
Member
 
Join Date: Sep 2006
Posts: 46
Liked 1 Times on 1 Posts

Default

Other than it being tough to work with 12 in small fixture "J" boxes.

__________________

Illigitimas non-carborundum

Snoonyb is offline  
 
Reply With Quote Quick reply to this message
Old 09-30-2006, 10:03 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

In commercial applications, most lighting circuits are 20 amp.
It can be done.. would be fine, but in a residential situation, 14ga is easier to work with, 15 amp circuits would be divided into smaller groups of fixtures, in the case of a failure or short, the 15 amp circuit would blow faster meaning less heat at the failure and through the circuit.

If you never have a problem, it will not make a difference.
There are advantages either way. If 20amp circuits work better for you.. go for it. Just be sure to use 20 amp rated switches and dimmers rated for the wattage of the total of the fixtures. The total of the rated wattage of the fixtures should be 80% or less of the dimmer's rated wattage.

Dimmers are another consideration..
A 2000 watt dimmer is really only good for 1600 watts of rated light fixtures.
That 2000 watt dimmer may cost you $100.00 or more and will need to be kept separate from the other dimmers, or, they will have to be further derated.

600 watt dimmers are available everywhere, can actually handle 480 watts. Typically sell for around $15.00 for a good quality dimmer.


Much to consider.
Welcome to the forum!
Tom

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Under Cabinet Lighting cibula11 Electrical and Wiring 36 05-04-2009 12:57 AM
How many light/switches per circuit? leeym Electrical and Wiring 7 02-10-2009 05:10 AM
funny acting circuits? lartomar2002 Electrical and Wiring 6 03-11-2008 03:53 PM
quick question hoarea Electrical and Wiring 17 02-21-2008 05:05 AM