DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Please help rewire a two-arm sconce




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-08-2014, 05:44 PM  
lodgeskins
Junior Member
 
Join Date: May 2011
Location: Norwalk, Ct
Posts: 5
Default Please help rewire a two-arm sconce

Hi, I purchased a two arm sconce that had the wires removed, and I am having trouble wiring it correctly. I have tried wiring it two different ways. The first way I destroyed my dimmer switch (it made a loud pop and now doesn't work), and the second way there was a spark coming from the sconce somewhere. When I connect a single sconce it works fine, so I assume I am doing something wrong still. Can anyone point me towards a diagram showing how a two arm sconce should be wired? I have googled and googled some more with no luck...

I will attempt to describe what I did each time in the event that the information is useful:

Try #1) I ran wire to each of the candle receivers, wire nutted the neutrals together with the white from the box, and did the same with the three hots. Commence big pop from dimmer switch

Try #2) tried to make one big loop; hot from box to one side of one of the bulb sockets. then ran a wire from the other side of that socket to one side of socket #2. Connected second side of socket #2 to the neutral from the box. Thought I was going to be good to go with this set up, but sparks flew.

I appreciate any help (description or just a link to a diagram).

Thanks,
Mike



__________________
lodgeskins is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2014, 05:54 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,902
Liked 814 Times on 727 Posts
Likes Given: 1405

Default

Your try #1 sounds like it should have worked. Check for a dead short, wire touching ground. There shoulod be burn marks at source of sparks. Nuetral to the side of fixture that the bulb screws into.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2014, 06:55 PM  
lodgeskins
Junior Member
 
Join Date: May 2011
Location: Norwalk, Ct
Posts: 5
Default

Thank you for the response. I figured it out; it was a really stupid mistake on my part. The candle stick receivers have height adjustment screws on both sides that I was attaching my wires to. The correct screws were hidden under a small cardboard sleeve at the tip of the socket, just below the threaded part. I've never used this style before... live and learn!

__________________
lodgeskins is offline  
 
Reply With Quote Quick reply to this message
Old 08-10-2014, 11:43 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,902
Liked 814 Times on 727 Posts
Likes Given: 1405

Default

Then did the the breaker kick off and if not why not.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Installing a wall sconce from an electrical outlet meghan Electrical and Wiring 3 11-27-2012 02:21 AM
Ceiling Fan Level Top Sconce D725A Electrical and Wiring 2 05-31-2012 04:21 PM
COnverting hard wired sconce into a plug in AudreyS Electrical and Wiring 6 01-28-2010 08:30 PM
To rewire a house? pwaltrip Electrical and Wiring 2 09-06-2007 04:45 PM
Questions after a home rewire Pastey Electrical and Wiring 5 01-03-2007 11:13 AM