DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > SPT-1W in conduit?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-30-2012, 01:07 PM  
captflx
Junior Member
 
Join Date: Nov 2010
Location: Montgomery, Al.
Posts: 3
Default SPT-1W in conduit?

I bought a small outside fountain and the wires are too short to reach my GFCI on my outside wall. On the 120 VAC transformer, output is "12VAC, 835mA, 10VA". The wire from the transformer to the pump is SPT-1W (two wires). I need to extend this SPT wire and put it inside conduit. The splice would be at both ends of the conduit, not inside. One splice will be inside the fountain body and the second will be in a weather proof junction box.

Moist locations. Will I be within code to do the above and are the wire nuts for moist areas o.k. to use inside the fountain, or is second weather proof box required?



__________________
captflx is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Why is conduit not used? pawned79 Electrical and Wiring 15 08-11-2011 01:02 PM
conduit under sidewalk sailor86 Electrical and Wiring 1 11-30-2010 08:03 PM
Grounding Outlets to Conduit ISUzj Electrical and Wiring 7 10-19-2010 08:50 AM
Add Conduit to a recessed panel BillinSC Electrical and Wiring 2 02-21-2009 09:58 PM
How many wires in a conduit? voltohm Electrical and Wiring 10 11-24-2008 05:14 PM