DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Stuck Plastic Prong in Outlet




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-05-2014, 08:14 PM  
InfiniteTape
Junior Member
 
Join Date: Oct 2011
Location: Indianapolis, IN
Posts: 4
Default Stuck Plastic Prong in Outlet

My wife put some tight fitting safety plugs into our kitchen island outlets (the kid could remove the normal ones without any trouble). So, not long after, one of the prongs breaks off inside an outlet while she tried to pry one of these things out. It's deep enough that my normal needle-nose can't reach.

Now, normally I'd just toss the whole outlet. Unfortunately, these outlets are in strips that run along the sides of the island. There's no way to remove or access the backs of the strips without removing the counter, sink, etc. Even if I could get to the strip, it would be practically impossible to find a replacement strip that fits.

Any ideas on how I might get the prong out without damaging the socket? Otherwise I may just have to use epoxy to permanently close the whole outlet.



__________________
InfiniteTape is offline  
 
Reply With Quote Quick reply to this message
Old 06-05-2014, 08:19 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,326
Liked 858 Times on 766 Posts
Likes Given: 1484

Default

Can you post a few photos.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-05-2014, 09:59 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,282
Liked 398 Times on 311 Posts
Likes Given: 162

Default

First, can we stop being so freaking paranoid about kids getting into receptacles? Those of us over 50 managed to survive without safety devices on outlets ... so can your kids.

Second, you might go to Harbor Freight of HD and buy some very thin pliers. OF COURSE, you would turn off the power first but then you could extract the silly prong. Be careful not to drive it deeper.

http://www.tmart.com/WL4-5-Inch-Carb...r_p152813.html

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 06-06-2014, 08:24 AM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Another option:

Numbered drill bits come in pretty small diameters.
You could drill a small hole in the prong, withdraw the bit, coat it with epoxy, reinsert, let it cure and then extract the prong.
You may need a pin vise to spin the drill bit.

Quote:
Originally Posted by CallMeVilla View Post
First, can we stop being so freaking paranoid about kids getting into receptacles?
Not as long as there is a profit to be made.
__________________
Wuzzat? is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 06-06-2014, 09:23 AM  
havasu
on permanent vacation
HRT_LIFETIMESUPPORTER.png
 
havasu's Avatar
 
Join Date: Oct 2010
Location: Southern California, CA
Posts: 2,241
Liked 109 Times on 92 Posts
Likes Given: 32

Default

You could try dipping a toothpick in superglue, push it into the socket until it touches the plastic, letting it adhere, then pulling both the toothpick and plastic out of the socket.

__________________
havasu is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 06-06-2014, 10:53 AM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

You kinda' want small pliers with parallel jaws.
Tweezers have parallel jaws and their gripping power could be increased by squeezing them closed with needle nose pliers (non-parallel jaws).

I'd first use a toothpick as a socket depth gauge to decide if the prong can be pushed too far into the socket or it will hit a backstop first. You'll be less tense if there is less riding on you doing all the right moves.

__________________

Last edited by Wuzzat?; 06-06-2014 at 11:01 AM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 06-06-2014, 11:22 AM  
bud16415
Fixer Upper
 
bud16415's Avatar
 
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 1,244
Liked 355 Times on 284 Posts
Likes Given: 116

Default

Reading this thread for some reason reminds me of the kids game “Operation” and removing the funny bone.

__________________
bud16415 is offline  
4
People Like This 
Reply With Quote Quick reply to this message
Old 06-06-2014, 06:51 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Quote:
Originally Posted by bud16415 View Post
for some reason reminds me of
There are some ink blots you should be looking at
http://en.wikipedia.org/wiki/Rorschach_test
__________________
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 06-08-2014, 11:35 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,326
Liked 858 Times on 766 Posts
Likes Given: 1484

Default

I still think you should be able to get into thing to change an outlet.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 06-11-2014, 06:35 AM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 974
Liked 106 Times on 86 Posts
Likes Given: 4

Default

Power off. Take a paper clip. Straighten it out. Bend a loop in one end to fit your finger and leave the other end sticking out. On the sticking out end put a small hook. try to push the end in along the prong and hook it from the back. Pull out.



__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Adding 110v Outlet off of 220v Oven Outlet? savatreatabvr Electrical and Wiring 4 01-25-2014 05:21 PM
Old ungrounded two-prong outlets D725A Electrical and Wiring 7 07-09-2012 05:48 AM
Replacing 2 prong outlet + wires might have been switched jeffcarlson1 Electrical and Wiring 12 12-15-2011 08:27 AM
How do I replace 2-prong cord with grounded cord? SphericalCamel Electrical and Wiring 9 02-05-2010 09:10 AM
Converting two prong to three prong plugs heavyfoot Electrical and Wiring 3 07-12-2006 10:24 PM