DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Wiring in 230v Air Compessor




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-21-2013, 10:43 PM  
Freezing
Junior Member
 
Join Date: Mar 2010
Posts: 5
Default Wiring in 230v Air Compessor

Purchased a 230v Kobalt Air Compressor and was looking for some educated suggestions on hooking this up. I have wired in a 220 receptacle for a welder, but was thinking of going straight to the servicebox/breaker with wire if possible. Appreciate any help and suggestions with wiring this up. My box is the standard 200amp service with plenty of space.

EDIT:
230v/15.7amp

My preliminary questions:
1. Wire type?
2. Breaker amps; will a 20amp cover this?
3. How do I determine which breaker type I have?



__________________

Last edited by Freezing; 11-21-2013 at 11:02 PM.
Freezing is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2013, 07:37 AM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 966
Liked 102 Times on 84 Posts
Likes Given: 4

Default

What do the installation instruction state for the required circuit? 20 amp amps #12 might cover it but there could be start up surges that will require this to be on a 30 amp circuit.



__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Old 11-22-2013, 07:57 AM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,271
Liked 388 Times on 304 Posts
Likes Given: 161

Default

Here is a really comprehensive (if not overly cautious) installation video. They recommend a 20A service with (of course) a 220V receptacle. You just need to read the installation manual to see if you need 20A or 30A.

__________________
CallMeVilla is offline  
oldognewtrick Likes This 
Reply With Quote Quick reply to this message
Old 11-22-2013, 04:15 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,195
Liked 109 Times on 95 Posts
Likes Given: 64

Default

My preliminary questions:
1. Wire type? Depends on where & how you hook it up.
2. Breaker amps; will a 20amp cover this? Depends on the motors nameplate requirements
3. How do I determine which breaker type I have? See if there is any print on the existing breakers or remove one to see what type it is.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
help with 3 way wiring ubonline Electrical and Wiring 8 06-20-2010 11:23 PM
Wiring new fan Amber Electrical and Wiring 1 10-14-2008 09:02 AM
DW & GD wiring shan2themax Electrical and Wiring 7 05-18-2008 09:09 AM
Wiring 220 Kelly Electrical and Wiring 6 02-04-2008 04:08 PM
230v welder, 240v compresser - breaker & wire size? Scot Clark Electrical and Wiring 3 02-02-2007 02:50 PM