2pyrs

LATEST ACTIVITY

• Posted in thread: load bearing walls on 01-17-2006 at 05:10 PM
  I live on a slab two story. I have two bearing walls on my first floor and one on my second
  floor. Most walls run from one side of the house to the other are bearing walls but not all
  well run from on...

• Posted in thread: New stove wiring black,red,white where on 12-17-2005 at 08:45 PM
  Need to know what wire go’s where in main box. Bought a new electric stove and have it all set
  up at the receptacle end and new 4 prong plug. #6 -4 wire but not sure about where the red,
  black, white ...

• Posted in thread: Instant hot water tanks on 12-14-2005 at 05:06 AM
  In other words, no shower while filling the washing machine, or no dishwasher and sink running
  while washing the clothes.This is wrong with the newer units sold today that can run more then
  one area, ...

• Posted in thread: Plywood over existink floor planks on 12-10-2005 at 10:42 PM
  I see know reason for any insulation between the old floor and ply tongue and groove ¾ if you
  well be placing laminated floor down since it should have plastic placed down before the
  laminated floor i...

• Posted in thread: Is foam insulation or radiant barrier inas good or better than fiberglass insulation? on 11-27-2005 at 08:29 PM
  There is no finished ceiling just the wood beams cross boards and back of the roof tiles.I well
  assume you well be replacing the ceiling.I don’t know why you would not want to use fiberglass
  insulatio...

• Posted in thread: Help with diagram for pelmets (not just a box type) on 11-21-2005 at 07:23 PM
  you tried your local Lowes/Homedepot you could go with the many diffrent ornamental
  mouldings. 2pyrs

• Posted in thread: Hiring day labor on 11-16-2005 at 10:22 PM
  In this day and age one has to be most careful who they bring home. May I suggest you contact
  your local church or Community Center, local boy Scouts even some high schools have programs to
  help as lo...

• Posted in thread: Bleach to unclog drain??? on 11-15-2005 at 08:40 PM
  I know this is and old post but just incase someone takes a look at it I would like to point
  out the dangers in using bleach and then if you should decide to add other chemicals one word
  BOOM Not that...

• Posted in thread: Adding on to a room on 11-15-2005 at 08:16 PM
  Do you have a plan drawing?Have you check materiel pricing?New two story/one? Small room or
  whole house add on?New slab floor/wood floor? Are you adding on to back or side to in large a
  room or rooms?...

• Posted in thread: Windows on 11-14-2005 at 08:02 AM
  Years ago when they started to make double pain windows all they did was place two pieces of
  glass together with a small air gap in aluminum frame. One of the problems was it would expand
  and contract...