Gift Premium Subscription To 8888

Join Date:


Last Activity:

07-16-2017 5:33 PM


  • Posted in thread: Tub Drain Solution? on 04-04-2017 at 02:31 PM
    I could use your help with options for installing the drain on a freestanding tub.The install
    is on a concrete slab, so what I have leftover from the previous tub is a square hole in the
    slab, dirt be...

  • Posted in thread: Moving a circuit on 03-09-2017 at 05:25 PM
    Would any electrical pros check me on this please.I have removed a jet spa bathtub, so now
    there is a receptacle that I don't need.On the bathroom end is a GFCI receptacle where the pump
    plugged in.On...

  • Posted in thread: Venting AV Exhaust on 03-25-2015 at 04:13 PM
    I could use some feedback on options to terminate an AV closet exhaust fan.It’s an inline fan
    located in the attic, and since it’s only venting warm dry air I don’t think I need to worry
    about moist a...

  • Posted in thread: Dishwasher Power Cord on 06-30-2012 at 07:07 PM
    I need to make a dishwasher power cord.New DW specs:12a/1450wMin 14g 167ºfCurrent house
    wiring:dedicated 20a circuit [12g]15a split receptacle [w/disposal]Q: Can I use ±6' of SJOOW
    [300v] & add a 15a ...

  • Posted in thread: Adding new receptacle and switch on 02-06-2012 at 07:31 PM
    I am getting hammered on other forums for not using pigtails. It's pigtails, or you are a
    hack!Can any pros out there explain all the pros and cons. Is it easier, faster, cheaper, or is
    it truly the o...

  • Posted in thread: Adding new receptacle and switch on 02-06-2012 at 02:31 PM
    The last drawing is correct except for one thing. You are not permitted to put two wires under
    one screw so you will need to pigtail the green at the receptacle. You could leave the green
    extra long a...

  • Posted in thread: Adding new receptacle and switch on 02-05-2012 at 03:24 PM
    Now I'm more confused. I thought that a drawing would help visualize my setup. Here is another
    drawing.Notes:* Existing Romex is approximately 2' from Box 3, and once cut there will not be
    enough slac...

  • Posted in thread: Adding new receptacle and switch on 02-04-2012 at 06:42 PM
    Hello, I would appreciate any pro electricians to check my proposed wiring.I need to add a new
    receptacle and switch to my AV closet by tapping into an existing circuit.The receptacle will
    be to power...