VIEW MY

MrMiz

Gift Premium Subscription To MrMiz

Join Date:

01-11-2009

Last Activity:

07-25-2017 2:54 PM

Likes Given: 3

5 Likes on 4 Posts 

    ABOUT ME

  • DIY everything, remodeling, decks, electronics, rentals.
  • Computer geek and Landlord
  • CJ

LATEST ACTIVITY

  • Posted in thread: Anybody know about backhoes? on 05-18-2017 at 08:54 AM
    Sounds to me like you've got 2 competing interests there that are making it harder for you to
    make a choice. If I'm understanding you right the first is clearing snow for your personal
    residence. The ...

  • Posted in thread: 16 inches on centre on 05-18-2017 at 08:07 AM
    That was covered, I told him the first stud is 15 1/4 from the end of the wall.I thought maybe
    it was, but I just wanted to point out that if your starting in a corner and there are no studs
    in a corn...

  • Posted in thread: 16 inches on centre on 05-18-2017 at 08:00 AM
    Somebody probably already said this but make sure your paying attention to what your laying
    over the top of the studs. The idea is that 16's on center will allow what ever you lay on top
    of it to hit ...

  • Posted in thread: Hobbies other than home repair. on 05-16-2017 at 08:16 AM
    Welding - Mostly Mig, family and friends give me more than enough projects to fill every extra
    hour I have. Window well covers seem to be requested the most, but I've made guitar pedal
    boards, Gun Saf...

  • Posted in thread: Deck Sagging and Rotting on 06-10-2016 at 10:39 AM
    I would put one or 2 bolts in just don't go over board, and don't OVER tighten. Your not trying
    to take the warp out your just trying to prevent future warping. If you attempt to take the
    warp out you...

  • Posted in thread: Deck Sagging and Rotting on 06-09-2016 at 09:24 AM
    If you have a few extra minutes go to Fine Home buildings website and watch the Ultimate Deck
    Build 2015. It's several videos that goes over all the steps they took and why building a deck.
    I know it ...

  • Posted in thread: Broken Beyond Repair on 03-16-2016 at 10:38 AM
    I know you're not really in the "advice" stage anymore but I thought I would share some
    anyway(it is the internet, were advice is always given needed or not, after all).Learn a new
    skill. Maybe not ju...

  • Posted in thread: Sump pump running, flush toilet and water comes up into bathtub on 07-17-2014 at 09:56 AM
    OK let's re-cap what the problem is. The problem is not related to a check valve, shut off
    valve or any other valve or how high the pump will pump.At first I thought perhaps the pump pit
    did not have ...

  • Posted in thread: Need help/suggestions for Deck framing problem. on 07-17-2014 at 08:27 AM
    looks good. For that low of deck did it even need a permit? I believe around here (Denver, co)
    most cities don't bother unless it is high enough to need railings. Now you have the permit and
    proof it ...

  • Posted in thread: Need help/suggestions for Deck framing problem. on 07-07-2014 at 05:06 PM
    Looks great, what did you do with the high post?Believe it or not the inspector calculated the
    loads and it passed with a 4x4. the loads where sufficient.... color me shocked. BUT that only
    means it p...

0 COMMENTS
POST A COMMENT