VIEW MY

NorPlan

Gift Premium Subscription To NorPlan

Join Date:

03-21-2014

Last Activity:

02-10-2016 12:42 PM

Likes Given: 10

9 Likes on 8 Posts 

    ABOUT ME

  • Retired
  • House & Yard Renovations
  • Professional Tool Caddy....lol...
  • Eastern Ontario
  • Ontario

LATEST ACTIVITY

  • Posted in thread: Propane Exhaust & Vent Pipes / How Close Can We Come ?? on 02-11-2016 at 05:43 AM
    I would still check, you never know that local codes haven't been made a lttle
    different;):hide: Absolutely, "Once Bitten,Twice Shy"...lol...

  • Posted in thread: Propane Exhaust & Vent Pipes / How Close Can We Come ?? on 02-10-2016 at 06:42 AM
    I found this, it looks like it needs 3 ft from an inside corner. @nealtw...Thanks for the
    Comeback... I figured it had to be in the Neighborhood of 3'... Thanks for the Chart, that will
    make it easie...

  • Posted in thread: Propane Exhaust & Vent Pipes / How Close Can We Come ?? on 02-09-2016 at 06:03 AM
    These are the withe plastic pipes?Yep.. The Exhaust sticks straight out about 2ft. From the
    Wall , Vent Pipe is about 6" Shorter with an elbow on the end facing downward...:)

  • Posted in thread: Propane Exhaust & Vent Pipes / How Close Can We Come ?? on 02-08-2016 at 10:40 AM
    :) Exploring the Idea of putting an Addition the Back of the House.. Foundation is "L" Shaped
    with the Back part 20ft. wide.. At this point the Foundation wall rises above ground a good
    4ft.+.. On the...

  • Posted in thread: Furnace Fan.. on 01-05-2016 at 02:14 PM
    :help: Furnace Fan Define "On" vs "Circulating" ?? We have a Lennox Propane Fired Furnace with
    a WiFi Thermostat Control.. The Furnace Fan has 3 Settings (On,Auto,Circulating).. I had set
    the Fan in t...

  • Posted in thread: 2 / 15amp Breakers Joined.. on 12-24-2015 at 05:56 AM
    So you have a stove outlet sitting there?:). There is a Junction Box on the Backwall (under the
    counter), Wiring from the Stove Top lead to.. The Wire for the Stove Top has been Marretted and
    Turned O...

  • Posted in thread: Oscillating Saw on 12-23-2015 at 09:23 PM
    Have used a flush cut blade in a jigsaw and now there is a flush cut blade for sawsalls. I have
    also cut a slot in a peice of wood and clamped it in place so the slot guides a hack saw
    blade.jig saw b...

  • Posted in thread: Oscillating Saw on 12-23-2015 at 04:38 PM
    :). Need to Cut a piece of Counter Top out hopefully without Undoing / Lifting Counter Top up..
    We had removed a Stove Top Incert.. The idea is to cut straight back from the outside edge to
    the wall.....

  • Posted in thread: 2 / 15amp Breakers Joined.. on 12-23-2015 at 06:21 AM
    One up and one down I hope. I think 1800 watts equall about 15 amps so you are pushing the
    limit, nothing else plugged into these circuits?10-4.. We figured considering the Maximum Draw
    from these Hot...

  • Posted in thread: 2 / 15amp Breakers Joined.. on 12-22-2015 at 10:18 AM
    How many watts do the hot plates take? that"s been replaced here with 20 gfci on 12 wire
    :welcome: The Induction Hot Plates are from Salton Products .. Touch Screen (C' / F') Settings
    .. 120Volt / 60H...

FORUM SIGNATURE
Remember to Measure Twice , Cut a Once..lol..
1 COMMENTS
Posted: 
March 21, 2014  •  03:01 PM
In Retirement...Everyday is a Saturday...The Wife is very Handy and not afraid to get right into it...We work Well Together surprisingly...lol...Whenever I see a Shadow looming over me, I immediately hand the Tool over my Shoulder, Hence my lot in life naming myself Professional Tool Caddy....lol...Got to have a Sense of Humour.....lol..
POST A COMMENT