Not-a-Rookie-Not-a-Guru

Gift Premium Subscription To Not-a-Rookie-Not-a-Guru

Join Date:

03-11-2014

Last Activity:

11-05-2014 4:36 PM

Likes Given: 1

2 Likes on 2 Posts 

LATEST ACTIVITY

  • Posted in thread: Control Board Question on 11-05-2014 at 04:36 PM
    So now I am at a total loss. Brand new controller board installed. Even if I have cool up to 80
    on the thermostat and heat down to 60 (it's 68 here now) i get normal operation calling heat. I
    am at a ...

  • Posted in thread: Control Board Question on 11-01-2014 at 11:49 PM
    Did the unit work with the old thermostat?Are you getting power to the inducer motor when
    calling for heat?No it didn't and no power at all.

  • Posted in thread: Control Board Question on 11-01-2014 at 09:14 PM
    Posting again with different title because it has really gotten totally away from the original
    question.Fan and AC work as expected but no heat on a 2001 Armstrong HVAC Model #
    PGE10B42D100A-3 with a ...

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 11-01-2014 at 08:32 PM
    "Is the furnace turned off at a wall switch?"I had time to really diagnose it today. It's not
    turned off at the switch nor has a fuse blown. I even decided to update the Thermostat and get
    rid of the ...

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 10-19-2014 at 07:31 PM
    Ok, I guess I am at worse than square 1. The heat ran fine the last few times I needed it.
    Switched to AC not a problem for two months then major (Pump, Blower Fan and circuit board)
    repairs. AC good ...

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 05-03-2014 at 11:34 AM
    A manager got involved and sent me a list of parts for my heater. The wire was "hid" with a
    description of "Igniotor Wire". I ordered the part and got it in. Everythings back together and
    it works as ...

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 03-31-2014 at 01:56 PM
    Maybe it's not as bad as I thought. I have been checking other parts sources and the Genuine
    Lennox Repair Part 48J67 Ignition Cable is strikingly similar to the 8MM Hi-Energy Silicone
    Suppression wir...

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 03-31-2014 at 01:25 PM
    I am back to square one. Ultimately they say the wire is no longer manufactured or available
    for purchase. What a waste!

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 03-12-2014 at 07:58 PM
    Got a reply from the internet source. They don't keep the part in stock but can get it. I think
    I will just order it.Thanks to everyone for the posts.

  • Posted in thread: Ignitor Wire question on 2002 Armstrong Heater on 03-12-2014 at 01:31 PM
    No, it is a standard connector. On the end that did not break off it appears to have a black
    sheath around the "carbon Fiber" which allows the connector to crimp and hold but on the end
    that is broken...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS