A U Tiger

LATEST ACTIVITY

• Posted in thread: Frosty Freeze on 06-11-2008 at 08:38 PM
  jeff1, I forget to mention the second link would not download pdf file so have no reply. May be
  my dialup speed, I live way back in the country.Thanks again

• Posted in thread: Frosty Freeze on 06-11-2008 at 08:34 PM
  Hi jeff1, Sorry about the model number. Lazy and looked up the manual instead of on refridg.The
  first link sure has described the fan striking and warming issues. Wanted to post another issue
  with the...

• Posted in thread: Nailing crown moulding? on 06-11-2008 at 08:21 PM
  Use the glue on bottom flat of crown and on ceiling with a line scribbed. Use nail your
  comfortable with but in alternating angles and staggerd along top and bottom. Recommend
  siliconized latex adheas...

• Posted in thread: Butting veneer end to end? on 06-11-2008 at 08:11 PM
  Razor knife, lap over cut (both sheets) at same pass. May want to consider a tenion at ends of
  center piece.

• Posted in thread: Frosty Freeze on 06-08-2008 at 02:10 PM
  Thanks Jeff1, I have read the link you provided and it sounds very much like my issue.The make
  is a whirlpool model # ET20PK 20.1 cu ft. ET20PMIt has provided seven years worry free service
  thus far, ...

• Posted in thread: Frosty Freeze on 06-07-2008 at 05:54 PM
  Why has my frost free refer developed a frost coating on all surfaces in freezer and noticed a
  warming in refer?Thanks for any suggestions.