Gift Premium Subscription To Aceinstaller

Join Date:


Last Activity:

11-16-2006 3:24 AM


  • Posted in thread: Pilot Light Will Not Stay On on 11-17-2006 at 12:43 AM
    clean pilot assembly:1 turn off gas valve and remove pilot tube from pilot assembly(you might
    have to remove assembly from the furnace to make this easier)2 there will be a pilot orifice in
    the pilot ...

  • Posted in thread: How do I get rid of mercury thermometer? on 11-15-2006 at 09:15 PM
    bring it into a local HVAC supply house. they have collection bins for free disposal.

  • Posted in thread: Carrier 58MXA080-8-1-20 Inadequate return air supply on 11-15-2006 at 09:09 PM
    its too bad that the tech that went to your house just said that without offering a solution
    and a quote to solve the return air around for some quotes on solving your return
    air issue and ...

  • Posted in thread: Evaporator placement on 11-15-2006 at 08:59 PM
    no way to say for sure without looking at the equiptment. but I have seen it a few times
    before. if in fact the coil was designed to be on the return side of your air handler, and was
    properly install...

  • Posted in thread: Trane XB10 Outside Fan not spining on 06-29-2006 at 09:26 PM
    if you aren't sure of yourself with the multimeter then call a've done all that
    you can up until the point of troubleshooting the motor to see if it needs replacing.BE SAFEAce

  • Posted in thread: Installing copper pipe on 05-11-2006 at 08:16 PM
    I install wirsbo systems all of the time in underslab heating applications connected to a
    boiler, but never in residential plumbing far as this pex goes, yes they do
    carry it in stores...

  • Posted in thread: HVAC guys - Estimates on 04-24-2006 at 06:18 PM
    I will rarely ever make an estimate without looking at a job to ensure that i'm giving a fair
    price and have knowledge of the labor involved.Call a local contractor to look at your system
    and give you...

  • Posted in thread: DIY snaking on 04-24-2006 at 05:52 PM
    depends what you use.I suggest you buy a snake that fits into a cordless drill to at least get
    the drains to function enough for use. then have the plumber do a routing with the more
    complicated setup...

  • Posted in thread: Installing copper pipe on 04-15-2006 at 11:10 PM
    bowplex is for sissies...:D

  • Posted in thread: I think I'm in trouble:-( on 04-15-2006 at 11:06 PM
    sometimes i'll just saw a little slot in the dohickie. then take a flathead srewdriver and
    insert it into the slot. then take a hammer and hit the srewdriver forcing the drain to turn
    counter clockwis...


Newest Threads