VIEW MY

acproblem

Gift Premium Subscription To acproblem

Join Date:

02-18-2010

Last Activity:

01-06-2012 1:11 PM

    ABOUT ME

  • efgqe
  • eqwgfqefg

LATEST ACTIVITY

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-06-2012 at 08:12 AM
    I do not use a heat anticipator on hot water heat, so if you have one run it up to hi setting
    like 1.2 amp. If you do want to use it then you would have to take a amp check at the stat and
    set it to t...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-05-2012 at 10:22 AM
    It does not make any difference. Take one wire from the transformer ether post and put it on
    post 2 of zone valve. Take the other transformer post and run that to stat ether wire as long
    as you use on...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-05-2012 at 09:45 AM
    His diagram is the same as yours. He is just using different colours. The basic principle is
    that one of the wires between the transformer and the valve has to go through the thermostat
    and get switch...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-05-2012 at 07:58 AM
    he is telling you what normal color code would be . both ways will work. paulhe is telling me
    to connect reds together from thermostat and transformer and run abother cable from the other
    screw on the...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-05-2012 at 07:39 AM
    That diagram would certainly turn on the valve. But what turns on the heat? There is more to
    the system than just the valve and thermostat.this is a 50 unit condo. the hot water is
    provided in the pip...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-04-2012 at 09:26 PM
    If it is red and white going to stat, put red from transformer to post 2 on the zone head, put
    red from stat to the other post of the transformer, put white from stat on post one of the zone
    head.than...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-04-2012 at 03:27 PM
    Did they use all the wires before? Look at you stat and which wires are tied in there? PaulI do
    not think so the black was used at all - it is heat only thermostat. I have put new thermostat.
    I also t...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-04-2012 at 02:21 PM
    [quote=acproblem;65902]it is a Taco 571-2

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-04-2012 at 12:45 PM
    You only need the one from the transformer and two from the stat, as long as that zone valve is
    spring loaded return. I can't see the letters on the valve, can you tell me what they are?
    Paulit is a T...

  • Posted in thread: how to connect zone valve to thermostat and transistor ? on 01-04-2012 at 12:12 PM
    I have a problem to connect the thermostat/transistor wires to upper part of the zone valve
    (the picture with a red circle). I needed to replace the valve as it was leaking water. Now the
    new valve is...

0 COMMENTS
POST A COMMENT