Last Activity:12-07-2008 2:53 PM
Posted in thread: Trouble Replacing Old Bathtub Spout on 09-07-2011 at 04:56 PM
Yes, it is the adapter used to secure the spout to...You can reuse the old adapter if there is
nothing wrong with it and there shouldn't be.Swap out the O-Ring off the new and old
Posted in thread: Trouble Replacing Old Bathtub Spout on 09-07-2011 at 04:49 PM
The Delta Adapter can either be secured with a set screw or sweated in place with solder and a
torch.You're referring to the copper fitting in photo 2? If so, what is the point of this
device? The new...
Posted in thread: Trouble Replacing Old Bathtub Spout on 09-07-2011 at 04:02 PM
After hours and hours of searching, I finally found a spout that fits. It's the Delta RP5834.
Apparently that copper cuff is welded onto my water supply pipe, and this is the only spout
that actually ...
Posted in thread: Problems with Replacing Bathtub Spout on 09-07-2011 at 12:57 PM
Duplicate post. Please disregard.
Posted in thread: Trouble Replacing Old Bathtub Spout on 09-07-2011 at 12:53 PM
I have read multiple articles across the web regarding changing the spout on a tub. They all
claim this is a straightforward, relatively easy process. However, that hasn't been the case
with me.I'll r...
Posted in thread: Unknown kitchen drawer hardware on 12-07-2008 at 01:53 PM
travelover, I have a friend who has what you're talking about. They use it to store small
sponges and whatnot. The more I search, I'm thinking this really might be a custom piece the
Posted in thread: Unknown kitchen drawer hardware on 12-07-2008 at 07:32 AM
No luck. There has to be a name for this simple little plastic clamp.I'm beginning to think
super glue will work just fine. Hah!
Posted in thread: Unknown kitchen drawer hardware on 12-07-2008 at 07:28 AM
Thanks inspectorD. I'll check it out. Part of my problem thus far has been the plethora of
cabinet pulls and whatnot that Google returns when I search for "cabinet hardware." Maybe I'll
have better lu...
Posted in thread: From Nearly Condemned to Craftsman on 12-06-2008 at 08:32 PM
I love the coziness the craftsman style always emits. Really nice work.
Posted in thread: Paint Color For Bedroom on 12-06-2008 at 08:28 PM
If you're going for a crisp, modern ambiance I would go with a stark white and use accessories,
pictures, linens, etc. to add punches of color throughout the room.If you're looking for a more
- Exhaust Fan In Bathroom
- One Word Game
- Need some help
- Flashing problem?
- Lawnmower Question
- Size of intake vent?
- Hall Way Door - Is this load bearing?
- Hallway header options where door is
- Carrier AC Outside Fan Will Not Turn ON
- Granite Installed - Possible Issue?
- Install Quarter Round when there is large gap underneath the baseboard?
- Req opinions on professionally completed drain repair.
- Pavers in an enclosed patio
- Driveway Resurfacing
- Shower faucet leaking when shower is on and replacing stem does not help