Balfro

LATEST ACTIVITY

• Posted in thread: 3-Way Switch Help on 10-06-2010 at 11:24 PM
  I actually had an electrician come in, and he too was confused. But he eventually figured it
  out.

• Posted in thread: 3-Way Switch Help on 09-23-2010 at 07:34 AM
  Ok, that seems like it should work. I'll try that. Thanks.

• Posted in thread: 3-Way Switch Help on 09-22-2010 at 10:07 PM
  I have no idea. Based on the photos I'd say that it would be the one at the bottom screw on
  switch #2, right? I mean that does make sense, but I tried that set-up and it does not work.See
  this is why ...

• Posted in thread: 3-Way Switch Help on 09-22-2010 at 08:46 AM
  Here is the OLD switch #1:Imageshack - photojr.jpg

• Posted in thread: 3-Way Switch Help on 09-22-2010 at 07:44 AM
  Thanks for the reply, however I guess I was remembering it wrong (it's been a few months). It
  turn out in the old switches all three screws were on the same side. I will try to post photos
  later, but ...

• Posted in thread: 3-Way Switch Help on 09-21-2010 at 10:59 PM
  I am trying to install two 3-Way Switches that are more modern-looking where there used to be
  older 3-Way Switches. The first thing I noticed is that on the new ones the two screws on the
  one side is ...

• Posted in thread: Cabinet Hinge Replacement on 09-13-2010 at 03:46 PM
  I was unaware such a product existed. That might do the trick, however that wouldn't solve the
  annoying tweaking problem to make them even. Can this stuff come off of the screw or is it
  permanent?

• Posted in thread: Cabinet Hinge Replacement on 09-13-2010 at 01:24 PM
  In my kitchen I have those European Style Hinges that can only be seen from inside the cabinets
  and consist of 2 parts (the one attached to the door and the one attached to the cabinet
  itself), where ...