- Posts 42
Last Activity:05-31-2012 9:39 PM
Posted in thread: Hole in sheathing under vinyl siding at outside outlet on 08-02-2011 at 03:08 PM
Nice repair ;)What do you call an electricians keyhole saw?A hammer :D
Posted in thread: Shingling over an old roof on 08-02-2011 at 02:48 PM
Along with the other 101 reasons you should not do a job like this, I don't believe and shingle
company would back up their warranty on the product.In other words there would be no warranty
on the shi...
Posted in thread: Need a breatheable stain to change color of Quikwall used to cover cinderblock. Help! on 08-02-2011 at 02:40 PM
I found this product, maybe they can add some dye or stain to it?Non-Yellowing and Breathable
Concrete Sealer - The Concrete NetworkThat site looks like it must have something that would
work for you.
Posted in thread: Need to Replace Shower Pan on 07-31-2011 at 07:08 PM
Ouch!! :eek:That is a shame. You will have to take the walls of the shower out to get the pan
out. Depending on what the walls are you may be able to re-use them and save some money. Sounds
like you h...
Posted in thread: Rot on supporting porch post on 07-30-2011 at 12:18 PM
If the pt post is directly on the concrete this will keep happening. They sell metal post bases
that get the wood off the concrete.Temp support the 6 x 6 and get the weight off it. Cut the
rot out and...
Posted in thread: Deck rebuild... cost??? (example given) on 07-30-2011 at 12:07 PM
That deck around here is 25,000.A 5000 catagory is usually a 14 to 16 foot basic straight out
deck. Sorry, andWelcome:DThis sounds right on to me.And if you went composite with vinyl rails
Posted in thread: Warped post, part of a deck on 07-30-2011 at 12:01 PM
No way to straighten you must remove. This is a common thing with pt wood even straight boards
at first will warp as they dry out. :(
Posted in thread: Cracked Driveway on 07-30-2011 at 11:55 AM
Your states laws are going the determine the length in the warranty. I believe most are 1 year.
Unfortunately I don't think there is much you can do, but if you make enough noise with maybe
some bad r...
Posted in thread: wood cutting on 07-30-2011 at 11:43 AM
Might sound elementary and if it does, I apologize. But remember to take the thickness of the
blade into account. If you measure and draw a line be sure to measure again to determine where
on the line...
Posted in thread: Quarter round trim for outside? on 07-30-2011 at 11:39 AM
Home Depot in my area has the plastic quarter round, just used about a month ago for a job
where we built exterior raised panels at a front entry out of azek and used it on the inside of
the panels. I...
- Floor Drain for AC Condensate Discharge
- Embedded Cleanout Covers
- Carrier HVAC - Fan not turning
- Can you tell me what it is called, please?
- Popping tiles
- Transistion problem
- Re attaching flagstone in walkway
- One Word Game
- What's that smell?
- Musky smelling rugs
- Builder's Joke Thread
- wiring thermostat
- Stucco Job
- Stainless Steel Fridge
- moisture from missing singles at roof peak?
- Shower pan