VIEW MY

BRIANL00

Gift Premium Subscription To BRIANL00

Join Date:

10-20-2010

Last Activity:

06-14-2013 7:04 PM

  • INDIANAPOLIS
  • IN

LATEST ACTIVITY

  • Posted in thread: Kitchen Nook Bench Seat on 03-30-2014 at 08:18 AM
    How do I build side support for a bench seat in a breakfast nook? I want to build a bench seat
    in a breakfast nook in my kitchen but I do not want the seat to come out the full length of the
    side wall...

  • Posted in thread: How To Identify Window Manufacturer on 06-09-2013 at 05:03 PM
    Thank you both for your posts. I contacted the glass guru. They quoted me a price of
    $225/window to repair the rotted sections. Is it out of the question to think I can cut wood
    stock to match the sas...

  • Posted in thread: How To Identify Window Manufacturer on 06-02-2013 at 03:44 PM
    Does anyone know how to identify a window manufacturer? My house was built in the late 1980s.
    The windows are casement windows(crank out stile/Anderson-type). Ideally I would like to find
    the manufact...

  • Posted in thread: Remove Carpet Glue from Concrete on 03-03-2013 at 07:14 AM
    I do not know who to call for this type work. After I got the glue off, I used Muriatic Acid in
    an attempt to etch the concrete and get to a cleaner surface. After I finished cleaning, I then
    applied ...

  • Posted in thread: Garage Door Wiring on 01-27-2012 at 05:54 AM
    I am replacing a Genie OCG Series Python Model #WKYRPI309848 garage door opener with a
    Chamberlain PD752DS. I want to use the existing wiring from the Genie for the safety reversing
    sensors. Any sugge...

  • Posted in thread: How to Take Out Furnace Blower Motor on 09-20-2011 at 05:37 AM
    Thanks! The blower motor is mounted on rails and held in place with sheet metal screws. I was
    able to remove the motor. I did have to move some wires after I diagramed them on a sheet of
    paper, and la...

  • Posted in thread: How to Take Out Furnace Blower Motor on 09-19-2011 at 10:30 AM
    How do you take out a furnace blower motor? I have an Air Ease(I believe it is made my
    Armstrong) furnace. I want to replace the blower motor and the motor capacitor. Motor is
    pulling too many amps. I...

  • Posted in thread: De-Humidifier Problem on 08-10-2011 at 07:10 AM
    I have a Sears brand de-humidifier that is not working properly. I have the LED set @ 70%. The
    appliance runs 24/7 but only partially fills the bucket each day. When I first got the
    appliance, it woul...

  • Posted in thread: Maytag cooling intermitantly on 08-10-2011 at 06:24 AM
    I think I'm back in business. I installed a new defrost thermostat yesterday. I also tested the
    defrost timer. I put everything back together and plugged it in yesterday and this morning the
    freezer i...

  • Posted in thread: Maytag cooling intermitantly on 08-09-2011 at 07:07 AM
    woodchuck:I think my defrost thermostat is bad because it is misshapen, and also, when I
    bypassed it and connected the two wires plugged into it the defrost heater came on.I have a
    follow-on question ...

0 COMMENTS
POST A COMMENT