Last Activity:12-03-2007 3:17 PM
Posted in thread: gable-end access to attic on 10-23-2007 at 11:22 PM
Why would you wanna put shutters on a gable vent were you can just have a removeable vent.
Posted in thread: Pella vs. Anderson on 10-23-2007 at 11:11 PM
Ahaa Yes the big debate!! ROLFLMAO.
Posted in thread: Roof repair on 1898 house on 10-23-2007 at 11:03 PM
Around here that might cost you around $315 - 350 a square with dimensional shingles.
Posted in thread: Paslode nail framing gun vs Bostitch combo on 10-23-2007 at 10:51 PM
My line of work The Paslode has always been a time saver, a good friend and nothing in my way
with the gas models.
Posted in thread: Near flat roof leaking should I shingle over? on 11-07-2006 at 10:34 AM
Sqaare Eye; I dont like to step on folks,But A roof coating really aint the way to go on a flat
with shingles. A quick fix can bring on Meany problems down the road. First an inspector will
not go for...
Posted in thread: Near flat roof leaking should I shingle over? on 11-02-2006 at 10:27 AM
Up here code says anything under a 3 1/2-12 pitch cannot take shingles! We use torch down
rubber roofing. And any roof thats interior is heated has to have this thin rubber membrane
called "Ice And wa...
Posted in thread: cedar clapboard over t111? on 10-27-2006 at 11:33 PM
I am having a hard time adding on to this so here goes:Please make sure you have all your
headers! Windows and Door fla$hing is in place and if you have a roof comming into a wall this
has to be stepp...
Posted in thread: cedar clapboard over t111? on 10-27-2006 at 11:02 PM
I stand behind Glenn on this one, and get the siding started as soon as weather permits.
Posted in thread: circular saw blades for general demolition? on 10-22-2006 at 10:08 PM
glennan- You aint kidding man! about them safety glasses. Today I was finishing up a garage I
was siding (side job) and was plugin up a window. So im cutting back the wood siding so I can
get a nailer...
Posted in thread: circular saw blades for general demolition? on 10-19-2006 at 04:22 PM
I always use the cheep Black&Decker Piranha 24carbide teeth for cutting into the unknowen! Its
thick,cheep and will hold its shape.