brumfan

LATEST ACTIVITY

• Posted in thread: Kenmore Oven "F1" fault on 06-23-2009 at 11:12 PM
  Found the problem. Bad neutral on the 115v receptacle. Repaired connection and now everything
  works ok.

• Posted in thread: Kenmore Oven "F1" fault on 06-23-2009 at 09:53 PM
  My Kenmore oven just went into an F1 fault mode. It appears to be rapidly overheating and even
  after reset and restart the same happens. Is the control module shot??

• Posted in thread: What's wrong with my kegerator on 01-13-2009 at 05:55 PM
  The hard start kit may not work if you have a plugged or restricted cap.tube.The pressures will
  not equalize when the compressor is off and it will not restart without going off on the
  o/load.If the t...