Bwildly

LATEST ACTIVITY

• Posted in thread: Dehumidifer Running on 05-21-2012 at 02:13 PM
  I bought a 70 pint Dehumidifer for my 900SQF basement, only about 500 SQF is finished, I set it
  at 45% and I think it ran all night, and the bucket was almost full this morning. I have never
  had moist...

• Posted in thread: Portable A/C Venting? on 05-05-2012 at 09:08 AM
  Hello, I have a portable DeLonghi PAC A110L A/C unit. I want to put this in my basement but I
  only want to use the dehumidifier function because I only have glass block windows and cant
  vent it to use...

• Posted in thread: Ice inside window? on 01-10-2010 at 08:30 AM
  Hello, here is my problem, These windows were installed in 2006, I did not have them put in so
  the only info I have is they are vinyl windows. I have had my whole house insulated in 2007. I
  thought I ...

• Posted in thread: Concrete basment floor drain on 09-10-2009 at 05:33 AM
  Thanks for your very detailed answer to my question! I want to update some things to make sure
  these are for that purpose. It rained yesterday kinda hard so I went and looked down the drain
  and I did ...

• Posted in thread: Concrete floor drain has holes on 09-08-2009 at 01:03 PM
  Are you sure that's concrete or maybe a cast iron drainpipe with a hole rusted through?Its
  concrete. The cast Iron starts at the bottom where the water is sitting.

• Posted in thread: Concrete floor drain has holes on 09-08-2009 at 11:08 AM
  Hello, here I have a picture of my floor drain in my laundry room. It is concrete all the way
  down to where the water is standing and that is where the actual pipe is. I noticed that about
  mid way up ...

• Posted in thread: Concrete basment floor drain on 09-08-2009 at 11:04 AM
  Hello, here I have a picture of my floor drain in my laundry room. It is concrete all the way
  down to where the water is standing and that is where the actual pipe is. I noticed that about
  mid way up ...

• Posted in thread: Electric Range Frigidaire "Pics" on 08-01-2009 at 07:13 PM
  This stove is only a little over 2 years old, Tonight my wife was cooking and she heard a pop
  and the bottom element stoped working but the broil and the top burners were working fine.
  After it cooled...

• Posted in thread: Exterior foundation priming/painting on 04-12-2009 at 07:39 PM
  Thanks Nestor, The concrete is 40 years old and im not sure what kind of paint it was but it
  was previously painted 2 months before we moved in and started bubbling and peeling about 7
  months after th...

• Posted in thread: Exterior foundation priming/painting on 04-08-2009 at 08:38 PM
  I am going to paint my exterior foundation "poured concrete". I have bought self priming
  masonary paint but was wondering if I should still use a primer first? I have properly preped
  the surface for p...