Last Activity:12-09-2011 4:40 PM
Posted in thread: Installing attic fan (options) on 04-07-2012 at 07:28 PM
Hi there,I'm looking into installing an attic fan on the roof to vent hot air in the summer
times, so to hopefully help reduce somewhat of the AC bill.The residence is a single-story SFH
that faces NW...
Posted in thread: Couple of things to tackle w/ recent HVAC on 12-08-2011 at 09:36 PM
Thank you so much for the help -- very helpful!In changing to run the compressor at the lower
991 CFM fan flow rate on cooling, I'm in a relatively dry climate thru'out the year, so
hopefully this won...
Posted in thread: Couple of things to tackle w/ recent HVAC on 12-08-2011 at 02:35 AM
Thx much for the ideas.For CFM and Fan speed:The Heil model # is H9MVX060F12. You're right
there are 4 fan speeds. I read the install manual and it stated that the 'speed taps are set
based on a nomin...
Posted in thread: Couple of things to tackle w/ recent HVAC on 12-05-2011 at 05:05 PM
Hi there,I had a contractor install a new set of HVAC 2 years back:- replaced old 85% gas
furnace w/ 95% efficiency 60K BTU variable speed 2-stage Heil furnace- installed new Bryant 3
ton legacy singl...
Posted in thread: Adding electrical line in garage on 11-14-2011 at 01:04 PM
His suggestions... Instead of the wires stapled along the edge of the two 2x4 double top plates
like they look now, we can - first drill 7/8" size holes thru' the top plates at the needed
spots and al...
Posted in thread: Adding electrical line in garage on 11-07-2011 at 08:26 PM
Hi, Thx for the response. I am only installing one new wire.*It is dangling too much.*Which
picture are you referring to (I've numbered the pics now)? There are several segments of the
line.For the li...
Posted in thread: Adding electrical line in garage on 11-07-2011 at 01:57 PM
Hi there,First post here. Relatively new DIYer so trying to learn a lot on many things.I'm
trying to run an electrical line to feed the outdoor motion sensing floodlight with a switch.
Have a couple o...