Last Activity:01-13-2013 10:29 PM
Likes Given: 2
1 Likes on 1 Posts
Posted in thread: Furnace problem on 01-12-2013 at 11:27 PM
If it's oil, maybe someone added gasoline to it?
Posted in thread: Bathroom Lighting Help on 01-12-2013 at 11:25 PM
folding Mirror to reflect the light?
Posted in thread: What takes dirty motor oil off of concrete on 01-12-2013 at 11:24 PM
Super Clean and let it sit till you get around to using the hose
Posted in thread: The End is.... Now? on 01-03-2013 at 02:48 PM
I emerged from my zombie bunker and was relieved/disappointed
Posted in thread: Installing thermopane vinyl windows in an old tin sided mobile home on 05-31-2012 at 11:52 PM
replacement windows. Originals were single pane with a storm window on the inside.
Posted in thread: Insulation Choices on 05-31-2012 at 11:34 PM
I'd like to find a reasonable cost internal or external insulation for my mobile home that
doesn't cost more than the value of the home (it's in a park, so land value isn't a part of
Posted in thread: Installing thermopane vinyl windows in an old tin sided mobile home on 03-12-2012 at 07:41 PM
I put the windows in myself. Insulated siding will more than double my walls R-value (twice
nothing is still nothing though) The "thickness" of my walls (3" plus the tin siding and
paneling on the int...
Posted in thread: Wish I had a better place but... on 02-02-2012 at 02:19 AM
I found a suitable roof insulation/repair material. Long life pool covers (15 year guarantee
against sun, wind and other damage) The thick bubble wrap with a rubberized outer coating makes
a light mat...
Posted in thread: Turn down water heater during the day? on 02-02-2012 at 02:16 AM
There is a bi-metal coil "flap" that can be fitted inside the "chimney" of the water heater
pipe that opens at over 100 degrees then closes around 75 to keep heat in.
Posted in thread: How many folks use the energy saving bulbs? on 02-02-2012 at 02:11 AM
Since I change all the ones in our store and home, I see about 3 of those a month. Usually
because they were in a high moisture environment.Going with LEDs as these burn out. Those are
- Transistion problem
- Carrier HVAC - Fan not turning
- Tub soft spots
- My cat is a moron, again
- Home improvement
- Re attaching flagstone in walkway
- What's that smell?
- Removing Shower Door/Frame Nails?
- Small hairline cracks in fiberglass balcony
- Tearing up ground level deck to deal with drainage issues at rear of house
- Granite Installed - Possible Issue?
- Floor Drain for AC Condensate Discharge
- Fastening to vinyl siding
- Builder's Joke Thread
- Stainless Steel Fridge
- One Word Game