VIEW MY

chauncey12

Gift Premium Subscription To chauncey12

Join Date:

11-04-2008

Last Activity:

11-07-2008 10:41 PM

    ABOUT ME

  • music
  • james b

LATEST ACTIVITY

  • Posted in thread: house side door on 11-07-2008 at 09:41 PM
    ok i need some ideas... replacing a side door. old house... 28x84 rough opening. ridiculous. i
    know. but i cant make it bigger, theres a closet on one side and a in wall radiator on the
    other. interio...

  • Posted in thread: Rick's bar contructions - lots of pics on 11-07-2008 at 09:37 PM
    great idea with the flooring. i used tile on my top.

  • Posted in thread: Recessed lighting question on 11-07-2008 at 09:29 PM
    p.s. one large flourescent fixture will be easier to move than 4-8 recessed lights. leave a
    little extra length in the bx so you can move it a foot or so.

  • Posted in thread: Recessed lighting question on 11-07-2008 at 09:27 PM
    well recessed is very bright first of all. i have recessed in my basement and its the brightest
    rooms in the house. the dropped cieling shouldt be a problem afterwards but you have to make
    sure a ligh...

  • Posted in thread: running bx in a small space on 11-04-2008 at 11:21 PM
    thats what i thought!~ awesome! thanx!

  • Posted in thread: drywall to plater on 11-04-2008 at 08:58 PM
    i was thinking plaster it in between first and then tape? to fill the bigger gaps?

  • Posted in thread: drywall to plater on 11-04-2008 at 07:41 PM
    so basicallytape over all the plaster to sheetrock joints.... awesome. thanx

  • Posted in thread: running bx in a small space on 11-04-2008 at 04:20 PM
    recently i removed a wall in my house and to my dismay there was a bx line running in it and up
    to the second floor. i cannot put it into my cieling bc the joists are perpindicular to the way
    the wire...

  • Posted in thread: Plywood walls.. on 11-04-2008 at 04:17 PM
    this stuff can be painted. I have done it before, but you do have to use a prime coat and be
    prepared to do a few coats. it actually looks ok when you do it right

  • Posted in thread: Smaller doors on 11-04-2008 at 04:11 PM
    if your only bringing it down a few inches get a 6 panel solid wood and cut it on the bottom.
    shouldnt be a problem

0 COMMENTS
POST A COMMENT