VIEW MY

chefman45887

Gift Premium Subscription To chefman45887

Join Date:

01-02-2010

Last Activity:

04-11-2014 6:05 PM

    ABOUT ME

  • lift cook read diy
  • mike

LATEST ACTIVITY

  • Posted in thread: Noise proofing a common wall on 08-15-2012 at 05:05 PM
    they are minimal , and most condos apartments are not up to exact or soundproofing standards
    due to costs or cutting corners.

  • Posted in thread: insulating the attic in my cape cod question on 08-15-2012 at 04:57 PM
    with my house even with insulation on floor and knee wall, I installed 1" foilfaced foamboard
    with 2" roofing capnails and the foamboard caulking and aluminum tape. the heat or cold
    envelope pending o...

  • Posted in thread: Textured ceiling cracks? on 08-15-2012 at 03:41 PM
    insulation(alot) ridge ventilation if not in new roof line. or louvered attic vents with power
    fan on each end of house. make sure you replace the darker looking insulation is has lost its
    complete in...

  • Posted in thread: house lifiting on 04-08-2012 at 06:59 PM
    update- decided with cost incurred basement will not be happening , house still will be lifted,
    had structural engineer come in to do a walk through, roof interior flooring/floorplan are 1st,
    brace a ...

  • Posted in thread: house lifiting on 02-21-2012 at 06:10 AM
    the house is single story,dimensions are 25'Wx48'L , had to replace joists in kitchen and bath
    , center support setup is crucial for any home especially when this one has to be lifted. how
    much higher...

  • Posted in thread: house lifiting on 02-20-2012 at 04:44 PM
    ty for the input Doug, The house is completely gutted, during this mild winter I have been
    replacing floor joists as well as sandwiched 3- 2x8 together the full length of the house in
    staggered format...

  • Posted in thread: subflooring choices on 01-04-2012 at 06:20 AM
    yeah they are 16 on center i'll go with the 3/4 osb tongue and groove is a no brainer glue and
    screwed

  • Posted in thread: subflooring choices on 01-03-2012 at 05:55 PM
    3/4" plywood tongue and groove glue and screw it down or the 3/4" premium osb T&G glue and
    screw it ?which one is best to use?

  • Posted in thread: house lifiting on 01-03-2012 at 11:48 AM
    will do im about a year out needed input and whatnot

  • Posted in thread: house lifiting on 01-03-2012 at 08:40 AM
    i couldnt agree more i will take your words to heed to see what the house mover can quote me
    and have a structural engineer come in before the house lifter that way when i have everything
    braced i hav...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS