condoowner

LATEST ACTIVITY

• Posted in thread: Possible mold problems?? on 05-24-2013 at 08:15 AM
  I will wait for the buidler's contractor to open up the wall and then I'll take some pictures
  as evidence. If the windows were not installed properly and damage happened, most likely I will
  talk the s...

• Posted in thread: Possible mold problems?? on 05-24-2013 at 06:06 AM
  I totally agree with you. however the big question is: who will have to pay for that ??If what
  you are saying is true , I would think this qualifies more as a defect of craftsmanship during
  constructi...

• Posted in thread: Possible mold problems?? on 05-23-2013 at 08:34 PM
  Thanks nealtw for replying.The building here is 8 years old. Talking to the strata, they never
  re-caulked the windows and doors, and I was under the impression that caulk had to be replaced
  (or re-poi...

• Posted in thread: Possible mold problems?? on 05-21-2013 at 07:55 PM
  Thanks nealtw for replying. You have helped so much on this forum since I registered! :)I've
  spoken to the strata, and we will call a contractor to look at the issue, possibly replacing
  the window and...

• Posted in thread: Possible mold problems?? on 05-20-2013 at 12:50 PM
  Hello,I am currently repainting my bedroom, and I was surprised to see the Zinsser Bin peeling
  off from the lower corner of the window frame. I applied a second coat but same thing. Grey-ish
  spots als...

• Posted in thread: Wiring led dimmer from existing light switch on 04-02-2013 at 11:31 AM
  Hi!I want to install a LED transformer and dimmer next to an existing light switch. I am really
  not sure how the kitchen was wired since there are 2 lights (ceiling and above sink) but I know
  which sw...

• Posted in thread: Kitchen cabinet handle length on 04-02-2013 at 10:48 AM
  I went for another type of handle. Its fairly similar but doesnt protrude much from the
  mounting holes hence eliminating the length problem alltogether..I borrowed a sample to try on
  the cabinets at h...

• Posted in thread: Kitchen cabinet handle length on 04-01-2013 at 05:13 PM
  What ever you do, some one will say they would have done it differently. I would just put them
  in and say, that's the way I like it. Very true indeed! I tried with some pieces of steel
  laying around ...

• Posted in thread: Kitchen cabinet handle length on 04-01-2013 at 03:24 PM
  "if you like, then that's all that matters"I agree, but at the same time I dont want everyone
  entering the kitchen to go like "eh dude, your cabinet handles are wayyy to big"...
  Nevertheless, I might ...

• Posted in thread: Kitchen cabinet handle length on 04-01-2013 at 01:44 PM
  Hi all! So I am in the final miles of redoing my kitchen and I am puzzled with the cabinet
  handles, more specifically, length and positioning on the doors. All I know is that I want
  straight cylindric...