Countertop Guy

LATEST ACTIVITY

• Posted in thread: Advise on replacing old countertops with granite on 01-15-2010 at 07:55 AM
  I also agree with Granite -girl , contact 2-3 granite suppliers/fabricators to get some
  suggestion about prices and granite color.

• Posted in thread: new cast iron sink with formica counter on 01-15-2010 at 07:47 AM
  As long as the hole you are putting the sink in is 5/8 smaller all the way around so the sink
  has a lip to sit on you will be ok. put some 1/4 blocks down 2 on each side to you don't smash
  your finger...

• Posted in thread: can you install corian directly on top of laminate countertop? on 01-15-2010 at 07:36 AM
  Dupont the manufacture of Corian recommends that you drill 1 inch holes every 8 inches or so in
  you existing tops, that way it can breath. Corian expands and contracts with heat and if air
  get trapped...

• Posted in thread: Hello Everyone (countertop ? Please ask...) on 01-15-2010 at 07:31 AM
  Hello Everyone,I look forward to getting to know some of you on this site. I have been in the
  counter top business for about 11 years and still going. I work a company in Washington State
  called Finel...

• Posted in thread: Granite countertops and backsplash on 01-15-2010 at 07:18 AM
  The grout will not stick to the polished surface of the stone counter top. In most cases I
  would suggest trying to get a caulk that is a close color match and clean the grout out and
  caulk it. If the ...

• Posted in thread: Kitchen Countertop Advice Needed on 01-15-2010 at 07:01 AM
  There are other products out there such as, Corian, Avonite, and Staron. These products are
  solid surfaces and not a stone product. If you like the constant look of a product I would
  suggest an engine...