daleslad

LATEST ACTIVITY

• Posted in thread: Question on the right siding on 09-20-2009 at 11:32 AM
  I think you are right unfortunately I do not have any help and I'm reluctant to do the Hardie
  board by myself because of the weight.I might just have to suck it up and get the wood panels
  at $34 each....

• Posted in thread: Question on the right siding on 09-19-2009 at 07:20 PM
  Does vinyl come in 4x8 sheets

• Posted in thread: Question on the right siding on 09-19-2009 at 04:54 PM
  thanks but I'm afraid that wouldn't be an option in my situation.

• Posted in thread: Question on the right siding on 09-19-2009 at 10:10 AM
  Hi, I have an old-old cabin in the sierra mountains of California which is in need of some
  TLC.I am planning on replacing the siding but not sure what to replace it with.It is at 7200
  feet and could b...

• Posted in thread: Help pulling cable on 08-28-2009 at 01:17 AM
  Thanks for the help guys, got it pulled in now with the help of a chugger.Sorry couldn't reply
  earlier but my hard drive took a dive.

• Posted in thread: Help pulling cable on 08-19-2009 at 11:01 AM
  Thanks for the info on the chugger. the conduit is 1 1/2 inch pvc

• Posted in thread: Help pulling cable on 08-19-2009 at 12:53 AM
  Thanks guys, I'm not sure how to calculate those dimensions edlank, so I'd be grateful kok328
  if you would check it out on your chart for me.I was using the string that the Home Depot guy
  said would b...

• Posted in thread: Help pulling cable on 08-18-2009 at 12:45 PM
  I might have bitten off more than I can chew with this pull but here is what I've got.I'm
  trying to pull 360 feet of 3-1/0 and one #6 ground wire through 1 1/2 inch of buried
  conduit.There are 2 soft ...

• Posted in thread: framing bid jargon on 07-07-2009 at 06:49 PM
  Thanks GBR, that helped a lot. I will pass on the advice about checking out the rest of the
  stuff that should be covered.

• Posted in thread: framing bid jargon on 07-06-2009 at 07:57 PM
  Need some expert help here mates, a friend got this bid for his workshop and wanted me to
  decipher it for him so that he could decide what he was getting was what he wanted from the
  contractor.Framing...