Last Activity:11-12-2015 3:21 AM
Likes Given: 4
Posted in thread: Is it Possible to Cut a Tile Like This - Pic Attached on 11-12-2015 at 08:43 AM
Thanks for the replies.The jamb is undercut. The tile is going into the jamb at an angle. I can
see why it is confusing. Part of the cut looks like it is for the stop. Sorry. Beachguy: I was
Posted in thread: Is it Possible to Cut a Tile Like This - Pic Attached on 11-11-2015 at 09:21 PM
This tile is wrapping a door jamb on both sides. The cut is outlined in black, The inside is
waste. This is a 12"x12" ceramic tile.I can't get to everything with a wet saw. For that stuff
I've tried u...
Posted in thread: Air handler will not blow on 05-22-2012 at 09:39 AM
Last night unit stop working. I took thermostat cover off and touch red to green. Nothing. With
wires still touching I went up in attic and removed fuses and replace after 5 minutes, unit
Posted in thread: 509 Wagner Professional Airless paint sprayer on 05-22-2012 at 09:28 AM
yes dried all the way through. I used CLR, it soften the paint up and use a bunch of different
tools to clean out.
Posted in thread: 509 Wagner Professional Airless paint sprayer on 03-31-2012 at 01:40 PM
Hi, I bought a used 509 Wagner Professional Airless paint sprayer at a auction. The previous
owner used in a cabinet shop. Besides the motor, I am taking the unit apart to service,
basically get rid o...
Posted in thread: Air handler will not blow on 03-31-2012 at 01:16 PM
thank you all for great advice. I will try this suggestions. I get one day off every two weeks,
so when i get time I'm gonna do these things
Posted in thread: Air handler will not blow on 03-29-2012 at 07:12 PM
Cool. Thanks for quick reply. Does a bad winding mean I would need a new motor? About how much
would that board be if the board needs replace?
Posted in thread: Air handler will not blow on 03-29-2012 at 12:16 AM
I have a Carrier air handler and a Bryant compressor/air conditioner about 6 years old that
supplies cool or warm air to the second floor. When I turn on my thermostat to cool the air
handler will not...
Posted in thread: Lennox Compressor wont turn on on 03-29-2012 at 12:16 AM
Is there a EZ trap overflow sensor. If this gets tripped turns off condenser. To fix: make sure
trap free of obstruction, can pour water through and confirm drains outside, make sure float is