dean28

LATEST ACTIVITY

• Posted in thread: evaporator motor on 03-12-2007 at 07:35 PM
  I pulled the unit out today.both panels right and left have to be taken off to change the
  blower motor.A hole in the wall wouln't have worked,the panels are the full length and width of
  the unit.It's ...

• Posted in thread: evaporator motor on 03-11-2007 at 01:28 PM
  this is a self contained heat pump,in a moble home.I have to replace the motor tomarow,and I
  was hoping to get some pointers.I haven't worked on one of these yet,

• Posted in thread: Trouble with Coleman 2880C766 gas forced air furnace on 03-10-2007 at 03:13 PM
  If the sensor for the flame dosn't send a signal to the board,the gas valve close ,and the
  ignition sequnce starts over.If this hapens 3times the unit goes into lock out.when you turn
  off the t-stat i...

• Posted in thread: evaporator motor on 03-10-2007 at 02:47 PM
  I need to get to the bottom motor on a moble home Insider.The unit has to be pulled out of the
  closet to get access to the lower motor.is the panel on the right side or the left side? If
  it's on the l...