derick2011

LATEST ACTIVITY

• Posted in thread: Switch Loop on 11-16-2011 at 05:23 PM
  Is it a reguler switch or a dimmable one. Reguler CFL's can not be controled by a dimmer
  switch. There are new ones out that can be but it will say right on the box. regular single
  pole switch, CFL ar...

• Posted in thread: Switch Loop on 11-16-2011 at 05:23 PM
  If the power is coming into the light fixture and then to the switch.Pig tail power black to
  switch white switch black to lamp black and second light blackPigtail power white to lamp white
  and second ...

• Posted in thread: Switch Loop on 11-16-2011 at 11:48 AM
  No I did not use 14/3. its 14/2. Did you see the wiring diagram attachment. They used 14/2. but
  u are saying if its more than one light on a switch loop you got to use 14/3? Damn. Curious,
  what is the...

• Posted in thread: Switch Loop on 11-16-2011 at 12:01 AM
  I attached a wiring diagram i found in book. I can't figured out how to wire for two lights. I
  tried doing this what's in the picture for the light closes to the power source. Connect black
  wire to wh...

• Posted in thread: Switch Loop on 11-15-2011 at 11:41 PM
  what does it mean when you flip the switch and both lights come on but one goes out after a
  split second and is dimly lit (if you flip the switch off then on again the first light may go
  out then the ...

• Posted in thread: Switch Loop on 11-15-2011 at 11:31 PM
  When I wired it like that, the light closes to the switch worked off the switch. The light
  between the power source and light closes to the switch did not work off the switch and was
  always on.

• Posted in thread: Switch Loop on 11-15-2011 at 10:29 PM
  Alright, I want to make sure I got it. Junction box for last light: cable coming in from power
  source: white wire connected to white wire from light; black wire pigtailed with black wire
  running to sw...

• Posted in thread: Switch Loop on 11-15-2011 at 04:09 PM
  I finished off an eave. There was a light in the middle of the eave. I put a light on the back
  wall and front wall, with a switch at the end. I took the light out that was in middle of eave
  and pigtai...

• Posted in thread: Drilled hole through roof, doh on 11-10-2011 at 01:36 PM
  Went on the roof today and didn't see any damage. Storm is coming so I'll know to night. I
  bought the roofing cement. Thanks for quick feedback!

• Posted in thread: Drilled hole through roof, doh on 11-09-2011 at 03:31 PM
  Was using flex bit to drill hole through top plate to feed wire through, not sure how happen,
  but I went through roof. Roof is ashalpt shingles. Hole is 9/16". Also, I haven't had a chance
  to look yet...