dodge2000

LATEST ACTIVITY

• Posted in thread: electric hot water circuit breaker on 10-30-2010 at 08:03 AM
  Thanks JoeD for answering my posted thread on wire size and breaker size use with hot water
  tank.

• Posted in thread: electric hot water circuit breaker on 10-29-2010 at 11:29 AM
  An electric storage hot water tank runs on 240 volts. It will be wired with #10 wire, can I use
  10-2/ground or do I need to use 10-3/ground. Should I use a 2-pole 30 amp. breaker, 2-pole 25
  amp. break...

• Posted in thread: Illuminated switch question on 08-19-2010 at 06:42 AM
  My understanding about switch a light from two locations, here top and bottom of stair is that
  you need to use what the trade people call a 3-way switch. (why they call it this I don't
  don't, they onl...

• Posted in thread: Half Work Half Dont.....going nuts! on 10-14-2009 at 07:38 PM
  Hi! I new to this forum. Your post is old. So my question is, did you get your electrical
  problems corrrected. I will check back tomorow for your answer.

• Posted in thread: How can I replace an old electric smoke detector ? on 10-07-2009 at 07:55 AM
  My mistake, for which I offer you my apology.

• Posted in thread: fan / baseboard heater question on 10-04-2009 at 05:27 PM
  deepstuff So the wall heater, fan forced, didn't come with its own thermostat?

• Posted in thread: How can I replace an old electric smoke detector ? on 10-04-2009 at 05:09 PM
  I know I am a new member to this forum. Joe D, I hope your feelings where not hurt by speedy
  petey. But he was right to correct your error in judgement, in my opinion. And I do hope you
  got your smoke...

• Posted in thread: BX Wire Problems on 09-30-2009 at 08:58 AM
  Boy the others, sure gave you a lot of information, bryan1882 First are there any local or
  state electrical codes the would prohibit the use of NM-B/romex cable for use in this wiring
  project. If the ...