VIEW MY

dolfan

Member

Gift Premium Subscription To dolfan

Join Date:

12-30-2012

Last Activity:

07-27-2014 4:56 PM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: help deck dropped on 07-27-2014 at 03:56 PM
    Thanks. I will hopefully post pics later today. When had the house inspected he said it was
    built good,right etc

  • Posted in thread: help deck dropped on 07-26-2014 at 06:10 PM
    The deck is 8 feet 5 inches wide and 23 feet 5 inches long. I just saw the part at the house in
    the middle or so has dropped about 3 inches give or take. There are no wood going to the ground
    against ...

  • Posted in thread: question about floor boards on 07-21-2014 at 04:51 AM
    Thanks. I am not going to do a exterior door. Would like to but it would be to hard to bc of
    thickness. I am thinking about using it for a coat closet

  • Posted in thread: question about floor boards on 07-17-2014 at 04:04 AM
    I got about 200 pcs of red mahagony floor boards about waist high (4 ft) and 2 inches wide.
    Just wondering what can be used for this. The guy i got it from was going to use it for a
    partial wall. I am...

  • Posted in thread: r and r vinyl siding on 07-03-2014 at 05:38 PM
    On the back was a copper line for gas logs. The side a nail is coming out and the siding has a
    small gash in it. The front looks like something hit it and put a small cut in it. thanks

  • Posted in thread: r and r vinyl siding on 07-03-2014 at 04:14 AM
    My house has vinyl siding and need 3 panels replaced(damaged). I have some extra pieces and
    wondering about r and r. I have looked at the ones i want to remove and the bottom i got to pop
    off and look...

  • Posted in thread: firepalce in a manufactured house on 05-31-2014 at 06:03 PM
    I know it is the wrong time of the year for this but just thought of this question. I had to
    get a new roof put on and went metal. I bought the metal myself. The place that sells it sells
    other metal ...

  • Posted in thread: mouse in duct work on 05-31-2014 at 05:53 PM
    This week i HAD a mouse in the duct work that is in the floor. The house is a manufactured. Is
    there basically a certain area that it could have got in or could it be any where it got in the
    duct work...

  • Posted in thread: exterior door questions on 05-11-2014 at 05:13 AM
    Thanks i did not think about the door knob protector shields. That was not what i was talking
    about but will check this out. What i was wanting to know was door latch shield

  • Posted in thread: exterior door questions on 05-10-2014 at 07:32 PM
    I am in a manufactured house and the back door is not solid door. I want to get a better door
    but right now i can't.There is nothing i can do is there to make it stronger is there? I want
    to get longe...

0 COMMENTS
POST A COMMENT