VIEW MY

donaldr

Lic. Master Electrician

Gift Premium Subscription To donaldr

Join Date:

05-16-2011

Last Activity:

08-24-2011 5:47 PM

  • san marcos
  • TX

LATEST ACTIVITY

  • Posted in thread: Replacing stand-alone electrical boxes in old house on 06-08-2011 at 03:47 PM
    go to lowes and get deep wire mold boxes and GFI plugs. You cant go from two blade plugs to two
    blade and a round ground, if there is no ground, must use GFI plugs

  • Posted in thread: Circuit Panel Grounding Question on 06-02-2011 at 12:16 AM
    Put a # 4 on the metal water piping and a #4 on the ground rod( use copper)

  • Posted in thread: GFCI Problem on 06-02-2011 at 12:04 AM
    you see to have line and load confussed the line is the hot wires coming into the box a black
    and a white normally and the load is the black and the white going down stream

  • Posted in thread: What would you do? on 06-01-2011 at 11:55 PM
    Mopar. You have it right just do it.P.S. I have seen lots of houses with ceiling fans in
    bathrooms

  • Posted in thread: Bathroom receptacle not working.. on 06-01-2011 at 11:38 PM
    more than likely its a GFI in another bathroom pull it out and check for voltage on the load
    side line and load are marked on the back of the plug

  • Posted in thread: Possible bad switch or outlet cause power outage in three rooms? on 06-01-2011 at 11:32 PM
    In my humble opinion you have a neutral problem start at the switch then the light then when
    you do the plugs try this trick plug a radio in and make sure it is turned on and loud to a
    known dead plug...

  • Posted in thread: Can I run electrical under concrete slab without cutting a trench on 06-01-2011 at 10:29 PM
    tell momma to pick out some new drapes

  • Posted in thread: installing an "extra" washer & dryer on 05-16-2011 at 02:52 PM
    Reguardless where you put it ,you will need a ckt for the washer and a ckt for the dryer. Hire
    an electrician and do it right the first time....don

  • Posted in thread: new outlets above a buffet - do I need a new circuit? on 05-16-2011 at 02:40 PM
    No new ckt. required.

  • Posted in thread: new outlets above a buffet - do I need a new circuit? on 05-16-2011 at 02:37 PM
    Thanks for the input. This buffet is basically a piece of furniture; "sideboard" or "cabinet
    with a counter-top" is probably a better description. I'm actually just talking about
    electricity for a cou...

FORUM SIGNATURE
Local Licensed Master Electrician Apple Electric Enterprises 512-393-5274 San Marcos, TX and Surrounding Areas!
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS