eddie

LATEST ACTIVITY

• Posted in thread: Replacing outside door trim on 08-07-2007 at 07:25 AM
  I am familar that brick molding can be readily purchased. By other trim I mean the other wood
  around the door behind the brick molding and the trim wood between the 2 doors. I have looked a
  Lowes and ...

• Posted in thread: Replacing outside door trim on 08-06-2007 at 12:27 PM
  Water has ruined the brickmolding and the other trim on a set of french doors. I need help and
  advice on replacing all the trim.

• Posted in thread: Frigidair Washer on 03-07-2007 at 07:06 AM
  The model number is hard to read but appeares to be FWS845QGS2. I really don't think it
  siphoning out as it always fills on the wash cycle and sometimes on the rinse cycle. It
  actually sounds like you...

• Posted in thread: Frigidair Washer on 03-06-2007 at 06:06 PM
  I have a 10 year old Frigidair washer that has a problem. It fills fine during the wash cycle
  but during the rinse cycle most of the time the water starts to drain before the tub has
  filled. This caus...

• Posted in thread: Trane XE 90 pressure switch on 02-28-2006 at 05:51 PM
  I'm not sure but I think the problem is solved. It has worked OK since SaturdayFeb. 25. I
  noticed a sag in the vent pipe of about 2 and a half inches in the last 15 feet from where it
  exited the house...

• Posted in thread: Trane XE 90 pressure switch on 02-24-2006 at 07:12 PM
  Thanks for all your information. I am sure the flue is clear as the exhaust fan puts out a lot
  of air. I don't know what Trane specifies but the vent I.D. is 2 inchs which matches the
  exhaust outlet. ...

• Posted in thread: Trane XE 90 pressure switch on 02-23-2006 at 06:41 PM
  I have what I have found by searching other forums is a fairly common problem with a Trane XE90
  furnace, I get a code when it dose'nt ignite (3flashes of a led) that shows the pressure switch
  is stuck...