edh

LATEST ACTIVITY

• Posted in thread: Outside GFCI Troubleshooting on 09-28-2011 at 05:41 PM
  Or did the fellow who did your wiring actually install a GFCI somewhere or has your house been
  protected by a GFCI in the electrical box. If you try to wire two GFCI's on the same circuit I
  believe yo...

• Posted in thread: Crawlspace dilemma on 10-13-2010 at 12:29 AM
  I have a cottage with a 4 ft crawlspace. I covered the gravel floor carefully with poly and
  framed the cement foundation walls, filled them with fiberglass insulation and covered them
  with poly. I hea...

• Posted in thread: Restaining deck problem on 10-13-2010 at 12:04 AM
  I would try calling McCloskey to see if they can suggest a solution. Otherwise I don't see an
  easy solution. The new stain you put on may have been for use on new or freshly sanded wood
  only.One probl...

• Posted in thread: Wish I had a better place but... on 10-12-2010 at 11:38 PM
  Built in 1973 I would guess your mobile home has fiberglass insulation. Is that what you are
  replacing?

• Posted in thread: Getting rid of mosquitos on 10-12-2010 at 11:20 PM
  "Mosquitoes and chiggers, thats the mystery of the universe I'd like solved."I have changed my
  thinking about mosquito's and other flying insects.Now I don't want anyone to think that I'm an
  extreme g...

• Posted in thread: Garage Plans, Testimonials??? on 10-10-2010 at 10:12 AM
  You mention pouring a slab. I would recommend a footing to build your garage on. Pour the slab
  inside the footing. far as stucco is concerned, if you want it to match your house I would
  use it but y...

• Posted in thread: Hi from Calgary on 10-09-2010 at 09:48 AM
  Hi from Calgary,I'm retired but work part time with a bunch of other retiree's. The house in my
  avitar is my "cabin". It was intended to be our retirement home but plans change.My wife and I
  bought it...

• Posted in thread: did work without a permit on 10-09-2010 at 09:41 AM
  All is not lost. Once you have your permit and know what is required, you will undoubtedly be
  able to salvage a lot of the material you used.You just added more work for yourself.