Eliz2008

LATEST ACTIVITY

• Posted in thread: Air exchanger - cold air on 11-15-2009 at 11:54 AM
  Our air exchanger is bringing in cold air into the house - abour 12°C when its on exchagne and
  16°C whne its on filter (average temp in hte house is 20-22°C) - even though there is suppose
  to be a hea...

• Posted in thread: cold floors and basement on 11-11-2009 at 06:20 AM
  Good morning,Our house has a full basement - very large one, about 1800sqft. The house consists
  of a main floor where we do most of our living. UP stairs there are two bedrooms and an office
  loft that...

• Posted in thread: someone moved my beams!! on 01-10-2008 at 10:59 AM
  Thanks Inspector D. DriCore folks told us that we could put walls on top of the dricore, but
  I'm sure they did not mean load bearing walls.I'm going to have the posts in the 2 x 4 moved
  back (with tem...

• Posted in thread: someone moved my beams!! on 01-08-2008 at 05:29 PM
  Thanks glennjanie. I was realy cocnred abut the safety. I guess as long as we don't move beams
  again we're safe. When we finish the basements I'll make sure that they are not moved
  again!!!So the post...

• Posted in thread: someone moved my beams!! on 01-08-2008 at 11:01 AM
  I posted some picutres in my gallery of the results of the beams being moved, Any thing I can
  do to rectify it? Damage done? Any worreis about safety? All comments appreciated.

• Posted in thread: someone moved my beams!! on 01-08-2008 at 06:12 AM
  Tool guy, the posts are the metal adjutable support posts and they did put them back, except
  for the posts that they sandwiched between the 2 x 4's. Those posts are not quite where they
  were oringally...

• Posted in thread: someone moved my beams!! on 01-07-2008 at 07:00 AM
  Thanks! When I get the pics, should I post them in this thread or put up a new one? (new here)

• Posted in thread: someone moved my beams!! on 01-07-2008 at 05:58 AM
  First time here and am working on little knowledge. Our house is 9 years old. We have a big
  open basement and are slowly starting to finish it. Recently we had dri core flooring installed
  and the exte...