Last Activity:08-08-2012 12:58 PM
Posted in thread: Repairing hole in wall on 08-08-2012 at 01:14 PM
Ok, I will respond in a bit with another photo.
Posted in thread: Repairing hole in wall on 08-08-2012 at 11:23 AM
Oh, heh. In that second picture, the brighter white rectangular portion (mid-left) is the small
face of the rectangular wall. Imagine a rectangular prism; it has 2 big faces and 4 thin faces.
Posted in thread: Repairing hole in wall on 08-08-2012 at 09:56 AM
The break feels thicker than 1/2"; closer to an inch. It goes as far as breaking and loosening
that white material I mentioned. For what it's worth, the break/hole is located on a thin wall.
Posted in thread: Repairing hole in wall on 08-07-2012 at 07:16 PM
Thanks for the video link. A question or two. For my case, there's no vapor barrier. But there
is some padding (the white stuff seen within the hole in my pic) hanging loose. Is that part of
Posted in thread: Repairing hole in wall on 08-07-2012 at 12:30 PM
Hi. As the title says, I have a problem with a wall hole. It's actually relatively big; about
12 cm by 6 cm. Here's a photo I took: I would like to repair this hole. I understand that it
- Possible mold problems??
- A little help with hardware, please?
- question about water from central a/c
- deck roof and gutter question
- Aggressive Deer
- Suggestions on how to repair
- Crumbling, 'spaling' exterior foundation walls
- One Word Game
- pressure washer advice
- Toilet will not fill
- Fire Safety
- Attaching wood post to concrete slab
- soffit vent ?
- Driveway Resurfacing
- Lennox A/C isn't cooling