Eric

LATEST ACTIVITY

• Posted in thread: Asbestos on 02-19-2009 at 02:37 PM
  does anyone know of good testing companies for popcorn ceilings that might contain Asbestos?

• Posted in thread: Drywall - Power Sander on 02-19-2009 at 02:36 PM
  thanks for the info - I'll be doing this real soon - but my job isn't so big, so I think I'll
  use the screens -

• Posted in thread: Hello from the edge of nowhere on 02-16-2009 at 05:38 PM
  Wow, my Father-in-Law would love to hear your stories. I'm going to tell him about it, and
  direct him here.

• Posted in thread: Hello...from Texas.... on 02-15-2009 at 01:29 PM
  Howdy from a new home owner in Austin!

• Posted in thread: !000 Yippi acya Glenn on 02-15-2009 at 11:02 AM
  I'm no pro. I'm pretty handy to have around though.I figure, if I've got a question, 1000
  other's do too.

• Posted in thread: !000 Yippi acya Glenn on 02-15-2009 at 09:23 AM
  Looks Like I have a long way to go - But I'm a believer in karma, and also from Texas - so
  those two things should carry me far.A CEO once told me that it isn't in the things you are
  told to do right,...

• Posted in thread: Cutting new floor register holes - Any tips or tricks ??? on 02-15-2009 at 08:18 AM
  I understand that you might get splinters - I suggested that because you don't want to cut a
  hole for the register that is over a joist, or plumbing. By starting from the bottom up, you
  will know you ...

• Posted in thread: Cutting new floor register holes - Any tips or tricks ??? on 02-14-2009 at 03:11 PM
  I've never done that, but I think I'd start by drilling out the corners from the bottom up, and
  then plunging a circular saw from the top down through the floor and subfloor.

• Posted in thread: Hello from Music City on 02-14-2009 at 03:09 PM
  hey Dave,I'm new here, too.

• Posted in thread: cold air return on 02-14-2009 at 08:35 AM
  Hi,I'm in contract for my first house right now, and had my inspection yesterday. When I opened
  the cabinet with the heater, I saw everything connected as normal, except for a flexible 5"
  pipe just da...