Last Activity:05-23-2015 11:11 PM
Likes Given: 146
360 Likes on 278 Posts
Posted in thread: Coins on 05-23-2015 at 05:25 PM
found these 2 guys 1950-S hiding in with the 1950P penniesi think they are on your listdo you
have the 7 different varieties of 1982 ?
Posted in thread: Coins on 05-23-2015 at 12:26 PM
looks heavy...I would love to dig thru that..oh the possibilities !!!!I may have some
extras,,that you need..I will look tonight if i get a chancehere are some of mine. take a look
at what i am lackin...
Posted in thread: Funny Pictures and stories.... on 05-23-2015 at 05:44 AM
Just Another Old Codger... It happened every Friday evening, almost without fail, when the sun
resembled a giant orange and was starting to dip into the blue ocean.Old Ed came strolling
along the beac...
Posted in thread: One Word Game on 05-22-2015 at 07:07 PM
bottle of wine, feel'n fine
Posted in thread: Installing Sub-Meter on 05-21-2015 at 02:05 AM
Posted in thread: shower head tube to riser 90 cx on 05-18-2015 at 06:31 PM
one 0or 2 wraps of tape is good.install the shower head arm..into the hole..get it
started..hand tightenshove, the handle of your plyers into the hole. and use the plyers as a
"handle" to turn the arm...
Posted in thread: need math help on 05-18-2015 at 09:03 AM
so...a cone has 2 measurementsso,,3.14x 16=50.24and 3.14 x 12 = 37.68that is correct for a cone
Posted in thread: need math help on 05-18-2015 at 07:08 AM
ok,,got that.now, trying to get the flat layout how do you get the circumference for a cone?
Posted in thread: need math help on 05-17-2015 at 07:46 PM
i suck at mathi am trying to find the cubic inch for a vessalthe shape is connical, 9126the
formula, iis a fab sheet..for one side of the cone.what i am tyring to figure..is how to get
cubic in from a...
Posted in thread: Installing Sub-Meter on 05-16-2015 at 12:59 AM
not knowing the piping..is it copper? galvinised?if copper...most likely looped under
slab.seriously....your best bet is a flir thermo image.you point it at a wall,,,and can "SEE"
the difference in te...