Last Activity:07-15-2012 7:26 PM
Posted in thread: What is your opinion on vessel sinks? on 07-15-2012 at 06:26 PM
The appropriate place for a vessel sink is a powder bath, where you're trying to achieve a
formal look with minimal use.
Posted in thread: exterior lead paint removal on 08-18-2011 at 05:26 PM
They sell lead paint swab kits at Home Depot or Sherwin Williams. Test the different colors.
Professionals now have to be certified to work on any home painted before 1978. Their duties
include, dust ...
Posted in thread: Hot in Houston on 08-02-2011 at 05:03 AM
It was 102 during the afternoon yesterday. The humidity is what kills you down here. It feels
like you're wrapped in a big blanket of sweat.
Posted in thread: Need to Replace Shower Pan on 08-01-2011 at 05:10 AM
I've seen those tub refinish guys do some pretty amazing repairs with epoxy. That one is kind
of large, but worth a try to see if it can be patched. Redoing the shower pan is often an
Posted in thread: attic insulation on 07-20-2011 at 07:06 AM
That's the way to go. It's sometimes difficult to judge just how hard it is to walk around in
your attic. Unless you have a lot of room, leave it to the pros.
Posted in thread: Quarter round trim for outside? on 07-20-2011 at 06:57 AM
There is also a product called AZEK which is a white PVC deck material. You could take a 1x6
and cut it down on a table saw into strips. Use a router to round off one edge and then
install. Then insta...
Posted in thread: Hot in Houston on 07-20-2011 at 06:46 AM
Hello, new member here from Houston Texas. Love to get on and read about everyones projects.
There are some great ideas here. Look forward to sharing. Great forum.
- One Word Game
- This is a Test Thread
- My cat is a moron, again
- Ideas to decor Small Bathroom
- New construction door in pole barn with ribbed aluminum siding
- Need to temporarily remove A/C to replace decking
- Building a Time Machine
- preparing yard for grass
- Stucco Job
- Replacing Prehung Front Entry Door in Stucco
- moisture from missing singles at roof peak?
- glue or thin set ?
- Transistion problem
- Builder's Joke Thread
- Happy Father's Day