VIEW MY

garbert

Gift Premium Subscription To garbert

Join Date:

11-11-2011

Last Activity:

07-12-2016 9:13 PM

2 Likes on 2 Posts 

LATEST ACTIVITY

  • Posted in thread: 4 inch drain plug remval on 07-13-2016 at 05:31 PM
    I hit it with a cold chisel next to the nut and made a hole in the brass. then put the pipe
    wrench on with the cheater and the plug turned right out. thanks for the help

  • Posted in thread: 4 inch drain plug remval on 07-11-2016 at 08:17 PM
    trying to remove a 4 inch brass drain plug with a hex nut from a cast iron septic pipe. I
    soaked it with pb blaster and tapped on the plug, then put more oil on it. put a 24 inch pipe
    wrench with a 3 ...

  • Posted in thread: water hydrant causing low pressure on 02-14-2016 at 06:21 PM
    yes, I contacted them, they are sending me a new control valve. just wondering if anyone
    thought it was well related

  • Posted in thread: water hydrant causing low pressure on 02-14-2016 at 04:31 PM
    yes I agree, pressure problem. one person told me to up the pressure at the well pump? the main
    line from the well is 3/4 inch. when it gets to the waterer it is only 3/8 inch.

  • Posted in thread: water hydrant causing low pressure on 02-14-2016 at 04:01 PM
    it is a nelson waterer. when the bowl fills up it tips on the balance beam and pushes the
    button on the control valve

  • Posted in thread: water hydrant causing low pressure on 02-14-2016 at 03:15 PM
    I have hydrant between the well and the barn. in the barn I have a cattle waterer with a inline
    control valve. it has a counterweight that pushes the button on the control valve to shut off
    when the b...

  • Posted in thread: electrical ? on 05-17-2015 at 03:59 PM
    would a ground fault receptacle work the same as a surge suppressor?

  • Posted in thread: gfi? on 11-21-2014 at 11:53 AM
    I did rewire it, just wondered if it should have tripped. black and white were reversed

  • Posted in thread: gfi? on 11-20-2014 at 05:59 PM
    will a gfi receptacle trip if the load wires going out are reversed?

  • Posted in thread: gfi arc on 10-22-2014 at 06:10 PM
    I have a gfi receptacle that arcs when I push the test button. the arc comes from the reset
    button. thanks for any advice

0 COMMENTS
POST A COMMENT


Newest Threads