gopher

LATEST ACTIVITY

• Posted in thread: replace vapor barrier? on 09-20-2009 at 08:19 PM
  F150 Board 2 In. x 48 In. x 96 In. - 270895 at The Home Depot i was looking at this today you
  think it will be ok?

• Posted in thread: replace vapor barrier? on 09-20-2009 at 08:16 PM
  i did not remove the wall ties so i dont think it safe structurally how do you suggest
  fastening the paper to the outside of the studs?

• Posted in thread: replace vapor barrier? on 09-18-2009 at 10:46 PM
  ok understoodi was concerned about not having a moisture barrier on the outside of the studs,
  but it sounds to be a non-issue. I was more concerned about the moisture barrier protecting the
  studs from...

• Posted in thread: replace vapor barrier? on 09-18-2009 at 08:54 PM
  moisture barrier is want i meant when posting the original title.i have removed the original
  moisture barrier from the inside due to water damage and insects. Now i need to replace it from
  the inside ...

• Posted in thread: replace vapor barrier? on 09-18-2009 at 06:57 PM
  anyone car to comment on my questions??? please!

• Posted in thread: replace vapor barrier? on 09-18-2009 at 12:36 AM
  also do i cut the foam to fit tightly in between the beams and foam on the face of it? or do i
  cut it slightly smaller and leave a gap and fill in the gap with the foam?

• Posted in thread: replace vapor barrier? on 09-17-2009 at 11:38 PM
  ok i understand about the brick mortar, it was only 2 holes so i can remove the hydralic cement
  and refill with actual brick mortar. But i have a question on the foam. its sounds like it will
  only fil...

• Posted in thread: replace vapor barrier? on 09-17-2009 at 10:35 PM
  hey guys i am doing some remodeling in my houseI didn't like the wood paneling so I ripped it
  outof course it was glued to the dry wall so the drywall had to be replacedi ripped out the
  drywall to dis...